beempy
Broadcasting a markdown file with beempy needs at least version 0.20.12. You can check it by:
beempy --version
Windows use can find a exe-file without the need to install python or other software in github. The current version is beempy-0.20.12-1166-49a8db87-py36_win64.zip. After downloading, the content can be extracted anywhere. Then the powershell can be used for using beempy, when the directory was changed to the directory in which the beempy.exe was stored.
When python is already installed, beempy can be installed by
pip install beem -U
pip3 should be used when python 3 is installed. When no wallet was created yet, it can be created by
beempy createwallet
Before being able to broadcast a post, the posting key must be added by:
beempy addkey
When entering this command, a first prompt asks for the wallet password and a second prompt asks for the posting key. It is useful to try copy/past to the terminal before. Depending on the terminal, pasting could be possible by right-click or ctrl-v.
Post parameter
By using the YAML extension, it is very convenient to write a steem post with typora. It is possible to set:
- title - set the post title
- tags - set the tags, at least one must be set
- permlink - when not set, it is derived from the title
- benficiaries - set's beneficiaries
- reply_identifier - when a authorperm is set as reply_identifier, the broadcasted content will be a reply to the reply_identifier
- percent-steem-dollars - can be 0 for 100% SP or 10000 for 50%/50%
- max-accepted-payout - can be used to reduce the payout, default is 1000000.000
- community - defines the community, when not set the first tag is used as community
The yaml part of this post consists of
It starts with three - and ends with three -. There must be one space after each:. I will also try to improve robustness in a next update.
Please do not use the three - somewhere else in the markdown file. This is something that I have to fix for the next beempy release! Thus, I used a screenshot to show the yaml part.
Be sure to use always a new title, otherwise you would edit your old post. Maybe I will add a prompt, that will ask if the post should really be edited...
Uploading images
Uploading images can be done by copy and pasting the image into the steemit.com editor and copying the steemitimages.com llink:
A simple image uploader is already implemented into beem. I will work on a command for beempy, so that upload is easily possible.
Typora
I enjoying writing my post with typora. It has some advantages over the steemit.com editor:
- build in spellchecker which shows possible corrections
- What you see is what you get:
- improved speed
- easy to store all written posts in markdown
- working offline
- less distraction during writing
- I can work on several post at once or working on a specific post for a longer time
- By storing the md-file in a cloud, editing on the smart phone / tablet or on a different notebook is possible
Editing a post
When I do not change the title, or when I add the permlink field, I can easily edit a post by re-posting it with beempy. Just edit the file and repost it with
beempy post -a author file_name.md
Broadcasting the post
I'm now finish with writing my post. I stored the file as How-to-post-with-typora-and-beempy.md.
I go now to the terminal and write:
beempy post -a holger80 How-to-post-with-typora-and-beempy.md
After entering my wallet password, my post is broadcasted.
Summary
- Write the post with typora and store the content as md-file.
- Add a YAML field and do never use the three
-somewhere else in the post. I will improve this in the next update. - Upload images to steemitimages.com by pasting them into the steemit.com editor, I will add an uploader for beempy.
- Be careful not to use the same title again, otherwise the old post will be edited. I will work an a prompt that asks in this case for a confirmation.
- You can change the payout to 100% SP by setting
percent-steem-dollars:0
I will try out typora for my next bigger post.
So far I'm not happy with steemit, busy or esteem for longer articles.
For regular posting busy is quite nice and for short markdowns steemit.
yeah nice! :) might have a play with this at some point.
$rewarding bounty 100% 3days
Congratulations to the following winner(s) of the bounty (The upvote value is distributed to the winner(s) by setting beneficiaries for this comment):
The bounty is set. When the post is 3.00 days old, a comment is created and upvoted with a 100.00% vote from holger80. The beneficaries of this comment is distributed to all top-level comment authors of this post. The comments are weighted by the creator and other reader by their upvotes. When no comment is created or no comment is upvoted, no comment from rewarding is created.
Thanks. By the way: I live typora now! Thanks for mentioning it.
Posted using Partiko Android
You got a 60.37% upvote from @ocdb courtesy of @holger80!
@ocdb is a non-profit bidbot for whitelisted Steemians, current max bid is 20 SBD and the respective amount in Steem.
Check our website https://thegoodwhales.io/ for the whitelist, queue and delegation info. Join our Discord channel for more information.
If you like what @ocd does, consider voting for ocd-witness through SteemConnect or on the Steemit Witnesses page. :)
Hi, @holger80!
You just got a 1.96% upvote from SteemPlus!
To get higher upvotes, earn more SteemPlus Points (SPP). On your Steemit wallet, check your SPP balance and click on "How to earn SPP?" to find out all the ways to earn.
If you're not using SteemPlus yet, please check our last posts in here to see the many ways in which SteemPlus can improve your Steem experience on Steemit and Busy.
Hi @holger80!
Your post was upvoted by @steem-ua, new Steem dApp, using UserAuthority for algorithmic post curation!
Your UA account score is currently 7.242 which ranks you at #69 across all Steem accounts.
Your rank has not changed in the last three days.
In our last Algorithmic Curation Round, consisting of 404 contributions, your post is ranked at #13.
Evaluation of your UA score:
Feel free to join our @steem-ua Discord server