Replacing a window lift switch on a 2012 KIA Sportage | EN-ES

in Hive Motors3 years ago

Hello friends of Hive Motors,

In this new publication wants to share with you the process to replace a Power Window Sub Switch, in this case for a KIA SPORTAGE 2012.

Well I tell you, I recently went out shopping with my wife and while we were in the Sport Wagon she lowered the window on her side to see something that caught her attention, but when she wanted to raise the window again the window lift switch began to fail, it was stuck, she made several attempts and we realized that indeed something was happening.

Hola amigos de Hive Motors,

En esta nueva publicación quiere compartirles el proceso para reemplazar un control elevavidrios eléctrico, en este caso para una KIA SPORTAGE 2012.

Bueno les comento, recientemente salí hacer unas compras con mi esposa y mientras íbamos en la camioneta ella bajó el vidrio de su lado para ver algo que le llamó la atención cuando quiso subir nuevamente el vidrio el control de mando comenzó a fallar, se quedaba pegado, hizo varios intentos y nos dimos cuenta que efectivamente algo estaba pasando.

Taking advantage that we had already left home, we went to a place where they offer repair this type of window lift systems, there the technician disassembled it and left it working, but unfortunately the repair worked only for a few days, I do not know if the piece would have some internal damage or simply the repair work was not well, the fact is that considering that it is an electrical part I did not want to continue risking with a new repair, since a bad repair could lead to further damage, so I decided to replace it with a new one.

Aprovechando que ya estamos fuera de casa, nos acercamos hasta un sitio donde ofrecen reparar este tipo de sistemas de elevavidrios, allí el técnico lo desarmó y lo dejó funcionando, pero lamentable la reparación funcionó solo por unos días, no sé si ya la pieza tendría algún daño interno o sencillamente el trabajo de reparación no quedó bien, el hecho es que considerando que se trata de una pieza eléctrica no quise seguir arriesgándome con una nueva reparación, ya que una mala manipulación podría acarrear un daño mayor, por lo que me decidí a reemplazarla por una nueva.

photo_2021-06-19_21-14-27.jpg

photo_2021-06-19_21-14-29.jpg

Fortunately my wife and I know the KIA product very well, so we checked the part number for the right power window switch and consulted with some reputable suppliers to make sure we bought the original part, and I was lucky enough to find that one of them had it available right here in the area.

Afortunadamente mi esposa y yo conocemos muy bien el producto KIA, así que buscamos el número de parte del interruptor eléctrico de elevavidrio derecho y consultamos con algunos proveedores de confianza para asegurarnos de comprar la pieza original, corrí con la suerte de que uno de ellos la tenía disponible aquí mismo en la zona.

Replacing this part is fairly simple, so I decided to do it myself. With the new replacement part in hand, I only needed a spline screwdriver to do this repair job.

Reemplazar esta pieza es bastante sencillo, así que decidí hacerlo yo mismo. Con el nuevo repuesto en mano, solo necesité un destornillador de estrías para hacer este trabajo.

separador HM.png

I started by unscrewing some side screws of the right door trim, one on the handle and one in the central part, applying a little force to pull to detach the hooks that attach it and that's it.

Comencé destornillando unos tornillos laterales de la vestidura de la puerta derecha, uno en la parte de la manilla y otro en la parte central, aplicando un poco de fuerza hay que halar para desprender los ganchos que la sujetan y listo.


separador HM.png

Next, I disconnected the connector or plug from the wiring harness that connects the electric window lift switch, and then disassembled the part to be replaced, which is embedded in the door trim. At this point, just replace one part with another, attach it and reconnect the wiring plug. However, before fixing it, I connected the plug to check that the new part was working at 100%, which was to be expected, after all it is a new and original part, but it is always better to be sure. Then, yes, I proceeded to install the door trim

Después, desconecté el conector o enchufe de la cablería que conecta el interruptor eléctrico elevavidrios, para posteriormente desmontar la pieza a reemplazar, la cual esta empotrada en la vestidura de la puerta. En este punto, solo hay que reemplazar una pieza por otra, fijarla y reconectar el enchufe de la cablería. Sin embargo, yo antes fijarla conecté el enchufe para comprobar que efectivamente el nuevo repuesto funcionaba al 100%, lo cual era de esperarse, después de todo se trata de una pieza nueva y original, pero igual siempre es mejor estar seguros. Entonces sí, procedí a instalar la vestidura de la puerta nuevamente.

In the particular case of electrical parts and pieces I always believe that it is better to replace than to repair, of course this means to evaluate the costs that this represents, but also to evaluate the risks and consequences of a bad repair, without counting the headaches for rework. It is possible that buying a new part, making sure of course that it is original, may be more economical in the future.

En el caso particular de partes y piezas eléctricas yo siempre creo que es mejor reemplazar que reparar, claro ello supone evaluar los costos que esto representa, pero también evaluar los riesgos y consecuencias de una mala reparación, sin contar los dolores de cabeza por retrabajos. Es posible que comprar una nueva pieza, asegurándose por supuesto que sea original, puede resultar más económico a futuro.

separador HM.png

All photographs in this post were taken by me with a Samsung S9 phone.

Todas las fotografías de esta publicación fueron tomadas por mi, con un teléfono Samsung S9.


Banner Gregcoin.gif

Sort:  

Vaya! Esta publicación puede ayudar a muchos jeje. Algunos dueños de los automóviles prefieren dejarlos dañados (quizás creen que es costoso repararlo) y no intentan repararlos por ellos mismos. Cuando el vidrio queda abajo, como en tu caso la necesidad obliga a repararlo o a llevar a que otro lo haga. Que bueno que tu pudiste hacerlo y nos regalas este tutorial para que otros también se animen.

Es la intención que las personas se atrevan a realizar reparaciones sencillas, para ir teniendo un poco de experiencia y un poco de ahorro de dinero. Saludos

No hay nada mejor que estar familiarizado con una marca, conocer los numeros de parte y saber si el producto es original o no, me identifico mucho con tu publicación Greg, así ha sido mi experiencia con los vehiculos que he tenido, porque trabaje con esas marcas. Buen post.

Si amigo, conozco el producto y es una ventaja cuando ya sabes cual pieza buscar y no caes en manos de piratas. Saludos

Me pasó algo similar, mi vidrio bajaba pero cuando quería subirlo tenía que llorarle para que lo hiciera jajaja. Al principio el mecánico me dijo que los pines hacían un falso contacto pero igual solo sirvió por unos días. Ahorita estoy con ese vidrio mal pero planeo reemplazar la pieza para hacer que funcione. Muy buen post que es muy explicativo, lo aplicaré para yo mismo reemplazarlos cuando los compre, así además de aprender sabemos que no nos pueden estar metiendo gato por liebre como dicen. ¡Un saludo!

Amigo en estos son problemas que aparecen con el tiempo, pueden ser recurrente, hay casos que tan solo puedes sustituir el interruptor y solucionas el problema. Gracias por tu comentario. Saludos

Congratulations @gregcoin! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You distributed more than 200 upvotes.
Your next target is to reach 300 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP