Mantenimiento al filtro de agua [ESP]/[ENG]

in Home Solutionslast month



lbDWjzFg94LPpl6w_20.webp
ehxV9hh4pU7n41wy_22.webp
FWBx3nmMFh7E6bro_23.webp
sVv7ND6olHtxmycT_24.webp
JjthGcnR6mSt1WXt_25.webp
afuYZA97R3BI8lEI_26.webp
qDUuo3RELyYYPW9A_27.webp
6rhOt9jTEhMKtDZN_28.webp
UTJA4Jdd47JGNW9C_29.webp
dxqQiGmAxBzCtNnF_30.webp

Mantenimiento al filtro de agua [ESP]/[ENG]

Saludos amigos de la comunidad @homesolutions, espero estén disfrutando de un excelente fin de semana, lleno de positivismo y energía.

En esta oportunidad paso por acá para compartirles un trabajo sencillo pero necesario que le hice a nuestro filtro de agua potable, porque ya hacia bastante tiempo que no se limpiaba.

Este es un filtro purificador de agua marca Griven que elimina olores y sabores al agua, además sirve para eliminar partículas de arena o tierra que posea el agua. No trabaja con electricidad porque no hace tratamientos químicos al agua.

El mantenimiento que se le hace es bastante sencillo, basta con desenroscar la tapa de la base y sacar la parte interna que es donde se acumula el barro y las impurezas. Ese núcleo central está formado por una especie de malla de varios espesores para filtrar y desbarrar el agua.

Cuando saqué el núcleo me di cuenta que estaba de color amarillento y en el fondo de la taza tenia un poco de barro acumulado en forma pastosa.

Lo sumergí en una solución de agua con jabón y cloro por varias horas para que soltara el barro y las impurezas que tenía adheridas. Luego lo dejé secar y lo soplé para verificar que los poros del filtro habían quedado libres de partículas.

Finalmente lo coloqué nuevamente en su base, desconecté la manguera de la llave e hice limpieza también de esta conexión para evitar que se tape con las impurezas que trae el agua.
Como inicialmente les comenté es un trabajo muy sencillo que cualquiera puede hacer pero debe hacerse al menos una vez al mes para que el filtro funcione de manera correcta y ejerza su función de manera adecuada.

Gracias por la atención prestada y me despido hasta una próxima oportunidad, esperando que esta información sea de utilidad para todos.
Bendiciones para todos.

Fotografías tomadas con Samsung Galaxy A12
Traductor de texto utilizado: Deepl
Portada diseñada con Canva

English Version

Water filter maintenance

Greetings friends of the @homesolutions community, I hope you are enjoying a great weekend, full of positivism and energy.

This time I come by to share with you a simple but necessary job that I did to our drinking water filter, because it has been a long time since it was cleaned.

This is a Griven water purifier filter that eliminates odors and flavors to the water, it also serves to remove particles of sand or dirt that the water has. It does not work with electricity because it does not make chemical treatments to the water.

The maintenance that is done is quite simple, just unscrew the lid of the base and remove the inner part which is where the mud and impurities accumulate. That central core is formed by a kind of mesh of various thicknesses to filter and de-sludge the water.

When I removed the core I noticed that it was yellowish in color and at the bottom of the cup there was some mud accumulated in a pasty form.

I submerged it in a solution of soapy water and chlorine bleach for several hours to loosen the mud and impurities that were stuck to it. Then I let it dry and blew it out to verify that the pores of the filter were free of particles.

Finally I put it back on its base, disconnected the hose from the faucet and also cleaned this connection to prevent it from getting clogged with impurities from the water.
As I initially told you, it is a very simple job that anyone can do but it should be done at least once a month so that the filter works properly and performs its function properly.

Thank you for your attention and I bid you farewell until next time, hoping that this information will be useful for everyone.
Blessings to all.

*Photographs taken with Samsung Galaxy A12
*Text translator used: Deepl

Water filter maintenance

Greetings friends of the @homesolutions community, I hope you are enjoying a great weekend, full of positivism and energy.

This time I come by to share with you a simple but necessary job that I did to our drinking water filter, because it has been a long time since it was cleaned.

This is a Griven water purifier filter that eliminates odors and flavors to the water, it also serves to remove particles of sand or dirt that the water has. It does not work with electricity because it does not make chemical treatments to the water.

The maintenance that is done is quite simple, just unscrew the lid of the base and remove the inner part which is where the mud and impurities accumulate. That central core is formed by a kind of mesh of various thicknesses to filter and de-sludge the water.

When I removed the core I noticed that it was yellowish in color and at the bottom of the cup there was some mud accumulated in a pasty form.

I submerged it in a solution of soapy water and chlorine bleach for several hours to loosen the mud and impurities that were stuck to it. Then I let it dry and blew it out to verify that the pores of the filter were free of particles.

Finally I put it back on its base, disconnected the hose from the faucet and also cleaned this connection to prevent it from getting clogged with impurities from the water.
As I initially told you, it is a very simple job that anyone can do but it should be done at least once a month so that the filter works properly and performs its function properly.

Thank you for your attention and I bid you farewell until next time, hoping that this information will be useful for everyone.
Blessings to all.

Photographs taken with Samsung Galaxy A12
Text translator used: Deepl
Cover page designed with Canva


For the best experience view this post on Liketu

Sort:  

Cada día es mas necesario filtrar y/o hervir el agua. Es genial que compartas como le realizas mantenimiento, seguro, será útil para alguien mas.

Gracias por el comentario

Este post ha sido valorado por el equipo de Home Solutions

Únete a nuestro trail de curación

Gracias equipo home solutions por su apoyo

Amigo gracias por compartir tu experiencia limpiando este filtro. Es el mismo que tengo en casa. A pesar de filtrar, pongo s hervir el agua. Hace días quise limpiar el filtro y me di cuenta que nunca se le quitó el empaque de plástico interior. Me lo instalaron y lo dejaron así. Increíble que yo no me había dado cuenta de eso, ni lo imaginaba. En estos días revisaré el estado en wue está. Me parece un excelente post. Así wue ya tengo una idea para hacer el mantenimiento.