Coqueto Llavero en forma de corazón elaborado en foami - Coquettish keychain in the shape of a heart made of foam (ESP // ENG) @karolinaher

in Build-It3 years ago
Hola que tal comunidad de hive, en esta oportunidad quiero compartir con ustedes la elaboración de un coqueto llavero en forma de corazón elaborado en foami.

Hello, such a hive community, this time I want to share with you the making of a cute heart-shaped keychain made of foam.


1.JPG

Materiales
Foami.
Pega.
Lápiz.
Tijera.
Aro para el llavero.
Piedra decorativa.
Regla.

Materials

Foami.

Job.

Pencil.

Scissors.

Key ring.

Decorative stone.

Rule.

Paso a paso
Lo primero que haremos es sacar 12 tiras de 14 x 0.8 cm, de color amarillo intenso y seis de color amarillo claro, para cada lado del corazón uniremos seis tiras por uno de los lados de tal manera que vayan quedando semi-montadas una encima de la otra.

Step by Step

The first thing we will do is take out 12 strips of 14 x 0.8 cm, of intense yellow color and six of light yellow color, for each side of the heart we will join six strips on one side in such a way that one will remain semi-mounted on top of the other.


2.jpg


3.JPG


4.JPG


5.JPG

Ahora cortaremos 1 cm de distancia de la horilla por el lado que está unido; pegaremos las tiras una sobre la otra, dejando 1 cm de distancia entre ellas, aremos un pequeño dobles para formar la mitad del corazón.

Now we will cut 1 cm of distance from the edge on the side that is joined; We will glue the strips one on top of the other, leaving 1 cm of distance between them, we will make a small double to form half of the heart.


6.JPG


7.JPG


8.JPG


9.JPG

Para formar nuestro corazón completo, uniremos las dos puntas y la parte de arriba, para decorar un poco el corazón cortaremos una ira de 14x1 y la colocaremos en la parte de arriba en la zona donde unimos el corazón.

To form our complete heart, we will join the two ends and the top part, to decorate the heart a little we will cut a 14x1 anger and place it on the top in the area where we join the heart.


10.JPG


11.JPG


12.JPG

Cortaremos dos tiras una de 10x0.3 cm y la otra de 5x0.8 para realizar la cinta donde va ir el aro del llavero.

We will cut two strips, one of 10x0.3 cm and the other of 5x0.8 to make the tape where the key ring will go.


13.JPG


14.JPG


15.JPG


16.JPG

Por ultimo colocaremos una piedra decorativa en el corazón y ya hemos terminado con nuestro trabajo. Espero haya sido de su agrado.

Finally we will place a decorative stone in the heart and we are done with our work. I hope it has been to your liking.


17.JPG


18.JPG


19.JPG