Mini muñeca elaborada a mano, Construyamos un hermoso detalle para regalar. Handmade mini doll, let's build a beautiful detail to give as a gift.

in Hive Diy10 months ago

Hola mis queridos creadores y amigos de esta comunidad!

Nuevamente les doy la bienvenida a mi blog y deseo que esta semana sea de bendiciones y prosperidad para todos.

Hoy les mostraré como elaboré un detalle personalizado que improvisé para una niña. A veces se nos complican las cosas y no podemos salir a comprar un detalle para regalar y entonces como no pude salir, me dispuse a buscar entre los materiales que tenía y lo primero que encontré fueron retazos de tela, entonces decidí hacer una mini muñeca, lo demás lo hice con otros materiales que conseguí en mi busqueda.. porque lo importante es buscar como resolver, entonces ahora te enseñaré como lo hice y te invito a que me acompañes en el proceso.

Necesitas:

Retazos de telaHilo estambre y pabilo
Agujas, hilos de coserAlgodón
TijeraDibujo
Trocito de mdfLija
Rama secaSilicón
TizaFoami mate y escarchado
Mostacillas negras

Comencemos:

  • Recorta un círculo del tamaño deseado (cabeza) y cose por todo el contorno, lo hice a mano por lo pequeño, luego voltea y rellena con algodón.
  • Recorta el gorrito guiándote por el ancho de la cabeza y a la parte delantera haz un pequeño corte de media luna y un par de orejitas de gato.
  • Cose las orejas primero, voltea y luego coloca dentro del gorrito, una al lado de la otra con la punta hacia abajo y cose por todo el borde.

Paso 2:

  • Voltea el gorro y toma la medida del contorno de la cabeza y mide el estambre para tejer clinejas para el cabello.
  • Para realizar el cuerpo recorta en tela, un rectángulo de 3x5cm y un círculo de 1,5cm.
    Cose primero el rectángulo y luego cose el círculo de abajo.
  • Recorta un trocito de icopor y dale forma circular e inserta dentro del cuerpo, hilvana en la orilla y frunce halando el hilo.

Paso 3:

  • Después de tejer la clineja, cose en todo el centro de la parte de arriba de la cabeza, luego rellena cosiendo la parte baja de la caabeza por el lado de atrás.
  • Ahora inserta una aguja por la parte trasera de la cabeza y cose los ojitos.
  • Luego cose uniendo el cuerpo a la cabeza.
  • Aplica un poquito de silicón y pega un flequillo en la frente.
  • Ahora en el gorrito cose los ojitos y cejas.

Paso 4:

  • Recorta dos círculos de 1 cm en tela para las manitos, cose hilvanando por la orilla, rellena con algodón y frunce halando el hilo hasta formar una bolita. luego cose los bracitos, voltea y cose las manitos a los brazos o mangas y cose al cuerpo.

Paso 5:

  • Recorta un triángulo pequeño y enrolla como una bufanda, luego inserta la aguja por detrás con hilo rosado y haz puntada para realizar la boca.
  • Pinta con tiza las mejillas, amarra la bufanda al cuello y haz 2 pequeños lacitos.

Paso 6:

  • Pega los lacitos y pon el gorrito.
  • Aparte recorta un nombre en foami escarchado y pega sobre foami mate y recorta dejando un pequeño borde.
  • Luego recorta un rectángulo en foami beige y recorta los lados en forma de madera y pinta haciendo vetas semejando madera, luego pega el nombre en el centro y en la parte superior abre un orificio y guinde con un mecatillo.

Paso 7:

  • Lija el trocito de mdf, haz un orificio, aplica silicón e inserta la rama y espera que pegue.
  • Por último, aplica silicón en la maderita y pega la muñequita en el centro y así quedará terminado este lindo detalle para regalar.

Fuente:
https://www.pinterest.es/pin/476255729358554602/

Publicación
- Traducida con DeepL
- Editada con Etiquetas HTML
- Fotos capturadas con tlf. BLU G5
- Editor de fotos: gridArt.

Espero te guste esta mini muñequita hecha con mucho amor para ti.

Ahora me despido feliz de compartir este hermoso tutorial deseando sea de provecho y veas las oportunidades que tienes de realizar cualquier manualidad con pocos materiales y obteniendo un buen resultado.
Gracias por llegar hasta aquí y por el apoyo que siempre das a mi publicacion y si deseas comentar será un placer para mi responder.
Saludos.

English

Hello my dear creators and friends of this community!
Once again I welcome you to my blog and wish you all blessings and prosperity this week.

Today I will show you how I made a personalized gift that I improvised for a little girl. Sometimes things get complicated and we can not go out to buy a detail to give and then as I could not go out, I set out to search among the materials I had and the first thing I found were scraps of fabric, then I decided to make a mini doll, the rest I did with other materials I got in my search .. because the important thing is to find how to solve, so now I'll show you how I did it and I invite you to join me in the process.

You need:

Pieces of fabricyarn and wick
Needles, sewing threadCotton
ScissorsDrawing
Small piece of mdfSandpaper
Dry branchSilicone
ChalkMatte and frosted Foami
Black beads

Let's begin:

Step 1:

  • Cut out a circle of the desired size (head) and sew all the way around, I did it by hand because it was so small, then flip it over and stuff it with cotton.
  • Cut out the beanie following the width of the head and make a small crescent cut and a pair of cat ears on the front.
  • Sew the ears on first, turn over and then place inside the beanie, side by side with the tip down and sew all around the edge.

Step 2:

  • Turn the hat inside out and measure the outline of the head and measure the yarn to knit hair clips.
  • To make the body, cut a 3x5cm rectangle and a 1.5cm circle out of the fabric.
    Sew the rectangle first and then sew the circle below.
  • Cut out a small piece of Styrofoam and shape it into a circle and insert it into the body, baste around the edge and gather by pulling the thread.

Step 3:

  • After knitting the eyebrow, sew all around the center of the top of the head, then fill in by sewing the lower part of the head from the back side.
  • Now insert a needle through the back of the head and sew the eyes.
  • Then sew the body to the head.
  • Apply a little bit of silicone and glue a fringe on the forehead.
  • Now on the hat sew the eyes and eyebrows.

Step 4:

  • Cut out two 1 cm circles in fabric for the little hands, sew by basting along the edge, stuff with cotton and gather by pulling the thread to form a ball, then sew the little arms, turn and sew the little hands to the arms or sleeves and sew to the body.

Step 5:

  • Cut out a small triangle and roll up like a scarf, then insert the needle in the back with pink thread and stitch to make the mouth.
  • Paint chalk on the cheeks, tie the scarf around the neck and make 2 small bows.

Step 6:

  • Glue the little bows and put on the hat.
  • Cut out a name in frosted foami and glue on matte foami and cut out leaving a small border.
  • Then cut out a rectangle in beige foami and cut out the sides in the shape of wood and paint making veins resembling wood, then glue the name in the center and at the top open a hole and stitch it with a hammer.

Step 7:

  • Sand the piece of mdf, make a hole, apply silicone and insert the branch and wait for it to stick.
  • Finally, apply silicone on the wood and glue the doll in the center and this is the end of this nice detail to give as a gift.

Source:
https://www.pinterest.es/pin/476255729358554602/

Publication
- Translated with DeepL
- Edited with HTML Tags
- Photos captured with BLU G5 phone.
- Photo editor: gridArt.

I hope you like this mini doll made with lots of love for you!

Now I say goodbye happy to share this beautiful tutorial wishing to be of benefit and see the opportunities you have to make any craft with few materials and getting a good result.
Thank you for coming here and for the support you always give to my publication and if you want to comment it will be a pleasure for me to answer.
Greetings.

Sort:  
 10 months ago  

Es muy hermosa esta muñeca, lo haces ver fácil con tu paso a paso, pero realmente es un trabajo de grandes detalles y mucho cuidado para lograr que quede tan precioso

Hola Yenny, gracias por tu comentario, si cuando hacemos las cosas con amor, tenemos la paciencia, cuidado y ganas de hacerlo bien.
Que bueno que te gustó!
Saludos

What a beautiful, tender and delicate work. I congratulate you, a well elaborated work with an excellent step by step. @elmundodebetty // Que trabajo tan hermoso, tierno y delicado. Te felicito, un trabajo bien elaborado con un excelente paso a paso. @elmundodebetty

Muchas gracias @diyhub por su comentario!
Ese es mi propósito, tratar de hacerlo bien para todos puedan aprender como se hace.
Saludos.

Hermoso trabajo amiga @elmundodebetty. Siempre es admirable lo que haces, gran detalle y dedicación. Abrazos.

!DIY

Muchas gracias amiga @dayadam por tan lindo comentario.
Bendiciones y un abrazo para ti.🌈

@dayadam just sent you a DIY token as a little appreciation for your post dear @elmundodebetty! Feel free to multiply it by sending someone else !DIY in a comment :) You can do that x times a day depending on your balance so:

Don't be shy - share some DIY!

https://leofinance.io/threads/dayadam/re-leothreads-f6kwnffs
The rewards earned on this comment will go directly to the people ( dayadam ) sharing the post on LeoThreads,LikeTu,dBuzz.

Que lindura que has creado, tienes mucho talento para crear estas cositas tan lindas y dejame decirte que el resultado final esta hermoso y adorable, felicidades 😍

Hola @elbuhito muchas gracias por tan lindo comentario!😚
Feliz y lindo día.

No hay mejor regalo que uno hecho por nosotros mismos, seguro que esa pequeña quedó encantada con ese lindo detalle.

Así es mi querida Jenny!
Y si le encantó su regalito!
Gracias por comentar.

Hola Betty :) Que bueno que pudiste resolver este regalito con las cosas que ya tenías en tu casa, la verdad que ser creativas nos salva de muchas maneras. Esta muñequita quedó preciosa y sin dudas tiene un valor más grande porque es un regalo personalizado y hecho con amor. Te felicito ❤️.

Hola Laura, si amiga como tu dices.
Muchas gracias por apreciar mi trabajo!.
Bendiciones. 🌹