Making a cute Christmas tree ornament. [Eng-Esp]

in Hive Diylast year

Making a cute Christmas tree ornament.

Haciendo un lindo adorno para el árbol de navidad.

portada.jpg


Hello friends readers and craft lovers, today I want to present a beautiful Christmas ornament that I made for my tree, it is so simple that does not require many materials, stay until the end of post and enjoy the step by step I will give to get to get this charming craft.

Hola amigos lectores y amantes de las manualidades, el día de hoy les quiero presentar un hermoso adorno de navidad que hice para mi árbol, es tan simple que no requiere de muchos materiales, quédate hasta el final de post y disfruta del paso a paso que daré para llegar a obtener este encanto de manualidad.


The materials I used for the craft were the following:

  • EVA rubber
  • Silicone stick
  • Scissors
  • Pencil
  • Ruler.

Los materiales que utilice para la manualidad fueron los siguientes:

  • Goma eva
  • Silicón en barra
  • Tijeras
  • Lápiz
  • Regla.

Imagen1.jpg


Here begins the realization of this craft and the first thing to do is to take the measurements of the length and width you want, in the image you can see the measurements I used.

Aquí comienza la realización de dicha manualidad y lo primero que se debe hacer es agarrar las medidas del largo y el ancho que se desee, en la imagen podrán observar las medidas que yo utilice.

Imagen2.jpg

Imagen3.jpg


Then he cut the strip, folded it in half and began to make cuts with the scissors as shown in the image.

Luego recortó la tira, la dobló por la mitad y le comienzo hacer cortes con la tijera así como se observa en la imagen.

Imagen4.jpg

Imagen5.jpg

Imagen6.jpg

Imagen7.jpg


At the top of the ends of the Christmas ornament I cut a little bit leaving it thinner than the bottom.

En la parte de arriba de las puntas del adorno navideño recorto un poco dejándolo más delgado que la parte de abajo.

Imagen8.jpg

<br On the two thinner ends he placed a little silicone and joined them together, preventing them from separating.

En las dos puntas más delgadas colocó un poco de silicón y las uno, evitando que estás puedan separarse.

Imagen9.jpg

Imagen20.jpg


Then we continue removing two strips, one thick and the other thin, so that the thick strip will be the part that holds the Christmas ornament, that is to say, it will be like its head and inside that head we will place the thinner strip as shown in the photos, we will turn and form the base which will help to hang the craft.

Seguidamente continuamos sacando dos tiras una gruesa y otra finita, para que la tira gruesa sea la parte que sujete al adorno de navidad, es decir será como su cabeza y dentro de esa cabeza colocaremos la tira más finita así como les muestro en las fotos vamos a girar y formaremos la base lo que ayudará a colgar la manualidad.

Imagen10.jpg

Imagen11.jpg

Imagen12.jpg

Imagen13.jpg


Once the part that will hold the Christmas ornament is obtained, we proceed to glue it and finish by placing a decorative stone.

Ya obtenido la parte que sostendrá el adorno navideño se procede a pegar y finalizamos colocándole una piedra decorativa.

Imagen14.jpg

Imagen15.jpg

Imagen16.jpg


Once the craft is finished, I leave you some images with the final result, so you can appreciate every detail.

Terminada la manualidad, les dejo unas imágenes con el resultado final, para que puedan apreciar cada detalle.

Imagen17.jpg

Imagen18.jpg

Imagen19.jpg


Without more to say and hoping that this craft is to the liking of each reader I say goodbye with a big and warm hug, love @shirahoshi.

Sin más que decir y esperando que esta manualidad sea del agrado de cada lector me despido con un gran y caluroso abrazo, los quiere @shirahoshi.

Logo sin sombra.gif


The photographs are my own and were taken by me with a Redmi 9 and were edited in powerpoint.

Las fotografías son de mi autoría y fueron tomadas por mí con un Redmi 9 y se editaron en powerpoint.


The Step by Step Gif was made by me in AdobePhotoshop CC2014.

El Gif de Paso a Paso fue realizado por mi en AdobePhotoshop CC2014.


The logo was designed by me in Adobe Illustrator CC 2015 and its animated version was made in After Effects CC 2017.

El logo fue diseñado por mí en Adobe Illustrator CC 2015 y su versión animada la realice en After Effects CC 2017.


Language corrector used Deepl.

Corrector de idioma utilizado Deepl.

Sort:  


The rewards earned on this comment will go directly to the people( @shirahoshi ) sharing the post on Twitter as long as they are registered with @poshtoken. Sign up at https://hiveposh.com.