What's up Weed Nerds! Hope all is well. I do have to say it may seem like 2021 is off to a bad start, but that does not have to be true for everyone. If you woke up today, have a full stomach, then you have a lot to be thank full for! For me my plants determine my mood, and yes sometimes personal life. But when my plants are not doing so well, I am also not doing so well. If you recall my last post I was running into problems, early in VEG, which is something that has never been an issue for me. I was thinking it was a PH issue, caused by one of my inputs. Well it turns out I was wrong, AGAIN! My issue was low humidity. You see when I first started to grow, I did not have the most ideal setup. I was growing in a closet, with poor air flow. Powered Mildew was a constant problem. You can say I now have PTSD from it, and when my room was sitting at 30% humidity for most of the winter, I welcomed it! Low humidity will close stomata, and cause a calcium issue. Then what happens for most, including me, they treat it with more Cal-Mag, and the condition worsens. Luckily I had some good people point this out, I got a sprayer to mist the foliage, and overnight I noticed a big difference, and now they look so much better. Now I am back on track to try to grow the best cannabis I can, but most of all, it is fun again.
In today's update I want to show you all an amazing product from one of the @bifbeans community members. It is a 3d printed Super Cropper, which can be found here. You can see my 5 Gallon Contender, right when I put on the Super Croppers, and a day after.
In the past I always used bread ties to hold down a branch, and used the main stem as an anchor. Compared to these Super Croppers, it is like a Neanderthal evolved to a Homo Sapien!
After my first attachment, I was hooked! Bending branches is just so relaxing, and I could not help myself...
That is a Silver Haze @loonatic hooked it up with!
The Gusher Mintz coming to life!
I actually ran out of the clips, and could use some more. They also have some Dog Bones, which are spreader to spread out a branch that is to close to another, which is something I may need. Those can be found here. I don't think I will need to put up a SGROG, which will be pretty nice. Sometimes those can be such a pain in the ass! Especially when you need to pull out plants, and now that I have a full 4x4, that is the last thing I want to do.
So for those that have been following along my grow journey over the years, you know that I am always learning stuff the hard way. Just how I learned how high humidity can do some serious damage, I just learned that low humidity in the VEG stage can be even worse! I suppose growing can be compared to walking on a high wire. You have to walk that thin line, and find perfect balance. So glad to be apart of a community, cause doing it alone is bound for failure. Thanks to all who have helped me, and I also hope maybe I can help someone else. RESPECT!
Well at least somebody's garden is doing well, and somebody's posts are making money!
Look at your post from the last 3 weeks, and look at the ones that got the big votes. DO one of those at least once a week bro. Im sure there are a few that got missed, but you know how sometimes it is hit and miss. But do a long lengthy post on your grow, and your chances will be real good, I promise. There is so much shit being posted, we need to drown that out with more good stuff. So hopefully more will see our post, maybe it will set an example.
Oh man I thought it would never rebound! !ENGAGE 14.20
ENGAGEtokens.Looks really beautiful that plants! I love it!
Thank you!
!ENGAGE 14.20
ENGAGEtokens.Those clips are bad ass. You got them from @bifbeans? How much?
Like 7$ plus shipping. Check it out https://bifbeans.com/3d-printed-products
!ENGAGE 14.20
ENGAGEtokens.looking great on those plants!!
Thanks man! !ENGAGE 14.20
ENGAGEtokens.growing perfection
ENGAGEtokens.!ENGAGE 14.20
Not quite, but I do suspect I will kill my record for yeild, and the strains I have will be fire since they are from some elite genetics.
Those are looking awesome now. I am gonna have to get some of those spreaders. I think they will really help my plants cause they are so thick.
Yeah I really think that would come in handy for a lot of people! It’s so cool seeing what people are using the 3D printers for. Something so simple is a game changer.
!ENGAGE 14.20
ENGAGEtokens.Damn, I’m going to have to get some of those. BIF is so legit. Those gals are looking happy as fuck!
Thanks, and yeah they got something special going on. I’m working on a project to be a breeder. Already got some pollination going down! !ENGAGE 14.20
ENGAGEtokens.Congratulations @jonyoudyer! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOP