How to adjust motorcycle band brake - Cómo ajustar freno de banda de motocicletas

in Hive Motors14 days ago

How to adjust motorcycle band brake

Today I am going to show you a few ways to adjust the rear brake of your motorcycle if it is a band brake.

Cómo ajustar freno de banda de motocicletas

El día de hoy Les voy a enseñar unas formas para poder ajustar el freno trasero de tu motocicleta si es de banda


IMG_20240515_131147000.jpg


But first we need to know what a band brake is a band brake are components that are used in bell brake systems, which are commonly found on the rear of many vehicles. they are made up of the brake bands and the brake drum which is where the friction makes the braking action.

Pero primero Necesitamos saber qué es un freno de banda un freno de banda son componentes que se utilizan en los sistemas de frenos de campana, que se encuentran comúnmente en la parte trasera de muchos vehículos. que se componen por las bandas de freno y el tambo de freno que donde que hace la fricción ora que frene


Screenshot_20240518-215128-274.png


There are two ways to adjust the rear brake of your motorcycle as long as it is a band brake, it is necessary to emphasize that this method of braking can be used on the front wheel and to adjust it is also the same.

Hay dos formar para poder ajustar el freno trasero de tu motocicleta siempre y cuando sea de banda, cambia hay que recalcar este método de frenado lo puede tener en la rueda delantera y para ajustarla también es igual


IMG_20240515_131503346.jpg


1-)Shape

We will use a wrench of the indicated number to hold the brake and tighten the nut that can be found on the rod below the brake.

1-)Forma

Usaremos una llave del número indicado >para poder aguantar el freno y >apretaremos la tuerca que se puede >conseguir en la varilla abajo del freno


IMG_20240515_131309651.jpg


2-)Shape

We will use a screwdriver no matter if it is a paddle or star screwdriver what is necessary is that it is not very thick, then we will introduce it as shown in the image and proceed to pry with it and with the hand we tighten the nut.

2-)Forma

Usaremos un destornillador no importa si >es de paleta o de estrella lo que si es
necesario es que no sea muy grueso , >luego introduciremos como se muestra en >la imagen y procederemos a hacer palanca >con el y con la mano apretamos la tuerca


IMG_20240515_131201204.jpg

IMG_20240515_131143408.jpg


This applies whether it is a front and rear brake of a motorcycle as long as it is a band brake, and that's it! You will have the brakes of your motorcycle ready to go out.
to ride

Esto aplica tanto si es un freno delantero y trasero de una motocicleta siempre y cuando sea de banda ,y listo! Tendrás los frenos de tu motocicleta listos para salir
a rodar


IMG_20240515_131225060.jpg


Sort:  

Congratulations @herreramaya15! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You published more than 20 posts.
Your next target is to reach 30 posts.
You received more than 50 HP as payout for your posts, comments and curation.
Your next payout target is 100 HP.
The unit is Hive Power equivalent because post and comment rewards can be split into HP and HBD

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP