Hive

mfmp (54)in #science • 8 years ago
RE: ECCO - When is Molybdenum not Molybdenum?
Yes, don't have any here. Got a gamma, beta, alpha detector on way. Might approach University
$0.00
0 0
mfmp (54)in #science • 8 years ago
RE: ECCO - When is Molybdenum not Molybdenum?
It has, we will do a background test after the radiographic plate exposure.
$0.00
1 2
mfmp (54)in #science • 8 years ago
RE: ECCO - When is Molybdenum not Molybdenum?
Sometimes the most important discoveries happen due to serendipity - knowing what was used where is the most important thing when understanding outcomes. The reactor was…
$0.00
1 4
mfmp (54)in #blog • 8 years ago
RE: ECCO - Day four - Your dreams are not yours alone
We are just about to go to the lab one last time and ask the bank to come and let us in. Otherwise, very disappointingly we are not sure it will happen this time. Suhas has…
$0.00
0 0
mfmp (54)in #science • 8 years ago
RE: ECCO - Understanding how the ECCO 'FREE ENERGY' reactor might work - part one
The resonant ultrasonics in water cause cavitation. Kenneth Shoulders says that charge clusters happen in cavitation because the forming bubble creates charge separation, this…
$0.00
1 0
mfmp (54)in #science • 8 years ago
RE: ECCO - Steam rate / quality videos
There always seam to be a dozen ways and more that thwart its arrival, but this seams closer.
$0.00
0 0
mfmp (54)in #science • 8 years ago
RE: ECCO - Steam rate / quality videos
The claim is between 920 and 1080W, this is not verified by us yet and is the biggest sticking point, a little higher up the pecking order than not knowing the input flow rate.
$0.00
0 0
homosymbion (55)in #science • 8 years ago
RE: ECCO - Titanium powder form and purity
Yes, oxides are observed.
$0.00
0 0
mfmp (54)in #science • 8 years ago
RE: ECCO - Titanium powder form and purity
He is reporting the specification as provided by the suppliers. We have ordered things in the past, such as 'pure nickel foil' only to find out it is steel foil. However…
$0.03
Past Payouts $0.03
- Author $0.03
- Curators $0.00
3 2
mfmp (54)in #science • 8 years ago
RE: ECCO - Nickel powder form and purity
Perhaps because is not Mond process Carbonyl Nickel, that is to say, it does to have deep light absorbing crevices, but is, as you can see from the SEM, extremely smooth and…
$0.00
0 0
mfmp (54)in #science • 8 years ago
RE: ECCO - Nickel powder form and purity
No, this is the raw material as supplied before any processing.
$0.00
0 2
mfmp (54)in #science • 8 years ago
RE: ECCO - Samples taped to radiographic plates
Don't have one in this location, will see if one of the universities do that we can gain access to.
$0.00
0 0
mfmp (54)in #science • 8 years ago
RE: ECCO - Explain this!
Well, it is more of a slurry. There is Nickel in there, so could be, interesting though that only this one sample has this property.
$0.00
0 0
mfmp (54)in #science • 8 years ago
RE: ECCO - Samples arrived, Nickel Sulphate used has been tested
As things stand now, as soon as Dr. George Egely is ready, which may be in second week July.
$0.00
0 0
mfmp (54)in #science • 8 years ago
RE: ECCO - Samples arrived, Nickel Sulphate used has been tested
A heater resistance wire is not needed. It is claimed to get up to temperature in 5 minutes. There is 100W per core on the discharges, 800W in total and 15-35W in 1MHz ultrasonics per core.
$0.00
1 2
mfmp (54)in #science • 8 years ago
RE: ECCO - Samples arrived, Nickel Sulphate used has been tested
Thankyou for your analysis. Things to hold in mind. There are 8 cores each with 1.6g in each As you can see in the schematic in this blog, the 'leaky' cores leak into a larger chamber.
$0.00
1 4
mfmp (54)in #science • 8 years ago
RE: ECCO - Samples arrived, Nickel Sulphate used has been tested
The Nickel Sulphate is used to produce Nickel foil in a process described in this article , which is essentially at atmospheric pressure. This nickel foil is then scrunched…
$0.00
1 6