So my puck prep and coffee procedure goes as follows:
- Water: Evian
- i let the portafilter heat while the zuriga heats itself. then i wipe the excess water out of it.
- i put the portafilter into the grinder and get exact 18g due to the gbw. its a double basket (17-20g)
- i tap all the sides to get it evenly distributed
- i tap it lightly verticaly on my tamping mat
- i tamp it and try to get even pressure( got decent at it, seems level the last 20 times) not sure tho if its enough pressure/too low/Consistant? but i heared that its not that important...
- putting the portafilter into the machine and try to reach 24-27sec while having 1:2 ratio. with my timemore mini
-> What i notice is that after the extraction the puck has slight impression in the middle from my Shower and the shower is slightly dirty, i always get some whater outta there and clean it. but i think its because of the blooming of the puck and not because the puck is too full.. since its made for up to 20g. but could be a problem.
i also used naked portafilter, extraction looks kinda decent i think.
-> im not sure if i like the coffee in general, i never tasted an ideal shot... my next step would be going to a lokale coffee roaster to try in advance a coffee that i like and see if i can get there.
Posted Using INLEO
Congratulations @csdav! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)
Your next target is to reach 100 upvotes.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOP