I've had an idea floating around in my head recently -- mostly inspired from my buddies that are into cycling, and my endeavouring to learn some Python. Now that I think about it -- I've learned quite a lot of python over the last year or so... Picking a project and running with it is a pretty great way to learn (bad habits).
Regardless.
- I've got a bike a home w/ a neat indoor trainer set up. Means I can get sweaty while going precisely nowhere, with the added benefit of terrifying my dog the whole time;
- Said bicycle has ANT+ speed and cadence sensors, and I've got a comparable heart-rate monitor as well;
- I've got an ANT+ USB dongle that acts as a receiver; and
- I recently discovered THIS python library that implements the ANT protocols:
Python implementation of the ANT, ANT+, and ANT-FS protocols. For more information about ANT, see http://www.thisisant.com/.
 |  |  |
Lets play!
Add the afforementioned python library to your projects requirements.txt file:
# requirements.txt
git+https://github.com/SamyCookie/python-ant
Install:
pip install -r requirements.txt
Enjoy:
Start up a new python file called cadence.py, and copy/paste the following:
import math
import re
import sys
import time
from ant.core import driver, node, event, message
from ant.core.constants import *
NETKEY = b'\xB9\xA5\x21\xFB\xBD\x72\xC3\x45'
class ANTListener(event.EventCallback):
last_speed_time = 0
last_speed_revs = 0
now_speed_revs = 0
# fivesec_speed_revs = 0
# tensec_speed_revs = 0
last_cadence_time = 0
last_cadence_revs = 0
now_cadence_revs = 0
# fives_cadence_revs = 0
# tens_cadence_revs = 0
wheel_diameter = 0.673 ## Wheel diameter in m
def process(self, msg, _channel):
if isinstance(msg, message.ChannelBroadcastDataMessage):
self.last_cadence_revs = self.now_cadence_revs
self.last_speed_revs = self.now_speed_revs
## Process Cadence Cumulative Revolutions
## ctimeLSB = msg.payload[1],ctimeMSB = msg.payload[2],cadenceLSB = msg.payload[3], cadenceMSB = msg.payload[4]
ctime = int(format(msg.payload[2],'#010b')+re.sub('0b','',format(msg.payload[1],'#010b')),2)
self.now_cadence_revs = int(format(msg.payload[4],'#010b')+re.sub('0b','',format(msg.payload[3],'#010b')),2)
## Precess Speed Cumulative Revolutions
## stimeLSB = msg.payload[5],stimeMSB = msg.payload[6],speedLSB = msg.payload[7],speedMSB = msg.payload[8]
stime = int(format(msg.payload[6],'#010b')+re.sub('0b','',format(msg.payload[5],'#010b')),2)
self.now_speed_revs = int(format(msg.payload[8],'#010b')+re.sub('0b','',format(msg.payload[7],'#010b')),2)
speed_rev_delta = self.now_speed_revs - self.last_speed_revs
speed_time_delta = stime - self.last_speed_time
cadence_rev_delta = self.now_cadence_revs - self.last_cadence_revs
cadence_time_delta = ctime - self.last_speed_time
speed = (speed_rev_delta/speed_time_delta)*1024*(self.wheel_diameter*math.pi*60*60/1000) ## rev/sec x 0.673*math.pi m/rev x 1km/1000m x 60s/min x 60min/hr
cadence = (cadence_rev_delta/cadence_time_delta)*1024*60
print("Cadence Timestamps: ",ctime/1024,"|| Cadence Revolutions: ",self.now_cadence_revs)
print("Cadence Rev Delta: ", cadence_rev_delta," Cadence Time Delta", cadence_time_delta," cadence: ",cadence," RPM")
print("Speed Timestamps: ",stime/1024,"|| Speed Revolutions: ",self.now_speed_revs)
print("Speed Rev Delta: ", speed_rev_delta," Speed Time Delta", speed_time_delta," Speed: ",speed," km/hr")
print("=============")
self.last_speed_time = stime
self.last_cadence_time = ctime
antDevice = '/dev/ttyUSB0'
antVendor=0x0fcf
# antProduct=0x1009
antProduct=0x1008
stick = driver.USB2Driver(idVendor=antVendor, idProduct=antProduct)
antnode = node.Node(stick)
antnode.start()
channel = antnode.getFreeChannel()
def setup(self):
# Start shit up
#stick = driver.USB2Driver()
if not self.antnode.running:
self.antnode.start()
# Setup channel
net = node.Network(name='N:ANT+', key=NETKEY)
self.antnode.setNetworkKey(0, net)
self.channel.name = 'C:HRM'
self.channel.assign(net, CHANNEL_TYPE_TWOWAY_RECEIVE)
self.channel.setID(121, 0, 0)
self.channel.searchTimeout = TIMEOUT_NEVER
self.channel.period = 8070
self.channel.frequency = 57
self.channel.open()
def start_listen(self):
if not self.antnode.running:
self.setup()
# Setup callback
# Note: We could also register an event listener for non-channel events by
# calling registerEventListener() on antnode rather than channel.
self.channel.registerCallback(ANTListener())
def stop_listen(self):
# Shutdown
self.channel.close()
self.channel.unassign()
self.antnode.stop()
The above script generally does the following:
setup()preps the ANT stick for the appropriate idVendor and idProduct, and finds a free channel to work on;- Currently, we set up a channel only for our speed/cadence sensors;
- You can find your device type (if you're a linux user) via
lsusb.
start_listen()starts the device listening for broadcast events from any sensors matching our specified type;stop_listen()stops the device and closes the channel and antnode -- freeing the USB device to use again;- For whatever reason, I end up having to unplug / re-plug the device to get it connected again.. whatever...
- Listens for broadcast events on the channel
Some notes on how this stuff works:
- Interpreting / handling the data was a massive pain in the ass... for whatever reason, the data is sent out in byte-arrays and required a fair deal of converting back and forth between binary and integer formatting...
- Had to learn a bit about MSB and LSB bit numbering... That was fun;
- If your wheels are a different size, you'll probably want to update the
wheel_diametervalue -- mine is 673mm; - Script spits out your instantaneous cadence in RPM's, and your instantaneous speed in km/hr -- if you want your shit Americanized, you can 'GIT OUT:
So assuming that you've punched in the appropriate antProduct listed in your lsusb, and updated for any difference in wheel size -- you SHOULD be up and rolling:
Open up your terminal:
source env/bin/activate
python
import cadence
listener = cadence.ANTListener()
listener.setup()
listener.start_listen()
you SHOULD start seeing outputs like the following:
Cadence Timestamps: 6.95703125 || Cadence Revolutions: 285
Cadence Rev Delta: 4 Cadence Time Delta 2742 cadence: 89.62800875273523 RPM
Speed Timestamps: 7.2412109375 || Speed Revolutions: 1581
Speed Rev Delta: 8 Speed Time Delta 3033 Speed: 20.55819452018244 km/hr
=============
Cadence Timestamps: 9.6435546875 || Cadence Revolutions: 289
Cadence Rev Delta: 4 Cadence Time Delta 2460 cadence: 99.90243902439025 RPM
Speed Timestamps: 10.1884765625 || Speed Revolutions: 1589
Speed Rev Delta: 8 Speed Time Delta 3018 Speed: 20.66037242535233 km/hr
=============
Cadence Timestamps: 13.0166015625 || Cadence Revolutions: 294
Cadence Rev Delta: 5 Cadence Time Delta 2896 cadence: 106.07734806629834 RPM
Speed Timestamps: 13.140625 || Speed Revolutions: 1597
Speed Rev Delta: 8 Speed Time Delta 3023 Speed: 20.62620045640534 km/hr
=============
Cadence Timestamps: 15.744140625 || Cadence Revolutions: 298
Cadence Rev Delta: 4 Cadence Time Delta 2666 cadence: 92.18304576144037 RPM
Speed Timestamps: 16.130859375 || Speed Revolutions: 1605
Speed Rev Delta: 8 Speed Time Delta 3062 Speed: 20.363489216104945 km/hr
=============
Cadence Timestamps: 18.486328125 || Cadence Revolutions: 302
Cadence Rev Delta: 4 Cadence Time Delta 2412 cadence: 101.8905472636816 RPM
Speed Timestamps: 18.7626953125 || Speed Revolutions: 1612
Speed Rev Delta: 7 Speed Time Delta 2695 Speed: 20.24448181159524 km/hr
So that's it that's all! That's how you can whip up a quick and dirty ANT+ speed/cadence reader...
Next steps are up to you -- I've got some cool ideas for what I want to accomplish... Images below paint a bit of a story for what I'm thinking...
 |  |  |
What projects / ideas are you working on? Do you like to have some kind of creative fire burning? I feel like most people here are pretty creative -- that's kind of the "early adopter" crowd that Steem has attracted.
Do you think you'd play a cycling game where you can meetup digitally and race other Steemians / Exhaust-o-nauts? I probably would, so long as I didn't have to go up against @run.vince.run or @jgrieco. This would probably be a fun way to have another "Solstice Race" event...
I can see that was too cool to resist. I really ought to look into what I can do with Python as I use it at work. Maybe I can automate some of my posts a bit.
Yeah, man! Play around and see what you can come up with.
@holger80's beem library is a pretty great resource for playing w/ python and Steem.
I've seen @felixxx has some tutorials I will bookmark. It's just a matter of finding time.
I am quite proud of part 3 tbh :)
Looks cool! I might give 'em a read!
You probably won't need them anymore. It is fairly basic stuff and only meant to bridge the gap between knowing some Python and actually getting a tool out for STEEM.
I think I would in fact I stopped cycling when the rainy season started, I'm happy to say that is mostly gone which means I'll be able to enjoy cycling around more but I would def play at night or maybe when rain is too bad.
Cool! Good to know!
I think it would be a strong community builder, and a great way to chat w/ some of the stronger athletes. I'm actually really excited about working on this.... Hoping to have a proof-of-concept fleshed out in the coming weeks....
Ideally -- it would integrate w/ EXHAUST nicely, too!
Think on building a developers support group as well I could also help if needed. Maybe start adding few tasks in @utopian-io and maybe get some support from the devlepers