Hunting the Elusive Morel Mushroom Using Spatial Data and GIS

in #foraging7 years ago (edited)


Each spring in the woodlands of the Northern Hemisphere a legendary mushroom comes out of hiding. The Morchella genus of fungi has as many as 30 species of morel that grow around the world. They are highly prized for their deliciously complex taste, but are difficult to cultivate artificially and can be tricky to find in nature. To make matters worse, many morel hunters fiercely protect their knowledge of where to find them (though others are more forthcoming). Information yearns to be free, and morel hunting deserves to be enjoyed by everyone!

Why are they so elusive?

Several factors conspire to make morels a challenge to locate. They have a very limited growth season and only appear if the temperature, moisture, and soil conditions are 'just right'. While they can grow anywhere, they primarily occur in specific types of forests and near particular trees. Their small size, ridged structure, and gray-black-yellow color act as a masterful camouflage in the woods. Finally, their popularity among both humans and other animals cause many of the best morel patches to get picked over.

Where / when do they grow?

Morels prefer well-drained soils with a moderate level of moisture. They will only appear when the temperature of the soil is approximately 52-58° Fahrenheit (11-15° Celsius), and neither too dry nor too moist. As a result, the start date and length of the growing season will vary by location and climate conditions.

Trees favored by morels

Morels are most often found near the base of mature or recently deceased trees. There is some speculation that this may be due to changes in the soil chemistry after many seasons of composting leaf litter. A compiled list of favorable trees in the US include:

  • American Elm
  • Tulip Poplar
  • White Pine
  • White Ash
  • Bigtooth Aspen
  • Cottonwood
  • Cherry
  • Maple
  • Sycamore
  • Red Elm
  • Apple
Some have also reported success near Oak trees, but this may just be a diversionary tactic (or a result of how common Oaks are).

How can I determine the best places to search?

One of the benefits of modern computing technology is the ability to process large amounts of spatial data using GIS (Geographic Information Systems). With the aid of open-source projects like QGIS, anyone with a computer can effortlessly sift through an incredible amount of extremely useful data for free. There is definitely a steep learning curve for some of the more complex functions of GIS, but learning how to display data is fairly straightforward.

After installing GIS software, the next step is to locate the appropriate data for where you will be searching. There are hundreds of country, state, and local government resources that offer free spatial data. A well-phrased search including the term 'spatial data' and 'clearinghouse' will usually yield several results for your locality. If you live in the United States, this is a good place to look for federal-level data.

What data will help?

Any forestry data on tree stands from the state or federal government will assist with isolating places to search. Some states have more detailed data that includes attributes on the species, age, and density of the trees.

White Pine tree stands in a State Forest, basemap by OSM

Overlay the filtered tree data with the boundaries of federal land to help locate public places where morel hunting is legal. In the United States this generally includes State and National Forests but not State or National Parks. Regional parks each have their own regulations, so always research an area rather than assuming that morel hunting is allowed! Never hunt on private property without permission!

If you cannot find any detailed tree data for your area, you can still get ideas for where to search by looking at soil, hydrology, elevation, and land use data. The elevation data can be further processed to identify terrain features, while the land use data clearly identifies forested areas. Scanning through aerial photography is also an effective method for locating nearby forested areas.

Filtered and color-coded tree stands with aerial basemap by ESRI. Warmer colors represent the most probable areas to find morels.

How do I find morels?

There is no infallible method for finding morels. Looking in the wrong place or at the wrong time will undoubtedly yield nothing but burrs and frustration. Patience, planning, and persistence will eventually pay off. Once you've used spatial data to find the right places to search, these tips and observations might expedite your success:

When to look

  • After it rains. The optimum moisture level is achieved after a good soak as rain water infiltrates drier soil.
  • In the morning. The low angles of sunlight in the dawn are ideal for spotting morels. It also helps to be the first person to look!
  • Early spring. Monitor a soil temperature map to know when the temperature is right.

Where to look

  • Soil moisture dictates how far from the base of a tree that morels can grow. During exceptionally dry seasons, they only grow in very close proximity to trees.
  • Broad valleys near a stream are good places to look as they often have the right soil and moisture conditions
  • Early in the season they tend to grow on south-facing slopes and ridge tops that get more direct sunlight. This warms the soil to a habitable temperature sooner.
  • Late in the season they tend to grow in shaded areas and on north-facing slopes where the soil temperature remains cooler.
  • Recently deceased Elm trees are famous for producing HUNDREDS of morels every year
  • Morels tend to thrive in areas that have recently experienced fire.

How to look

  • Walk slowly and scan the underbrush with your gaze slightly down.
  • When you find an area with the right soil and trees, crouch near the ground and carefully look in all directions for several minutes.
  • Remember, morels do an excellent job of blending in with their environment. Train your eyes for pattern recognition before you hunt and bring a picture with you.

Once you find one:

  • Look around - where there is one, there are often many!
  • Sever the base of the stalk with a pinch or knife to avoid damaging the underground mycelium that produces morels.
  • Mark the location on a map or with a GPS! Morels tend to return to the same spots each year.
  • Carry picked morels in a mesh sack rather than a plastic bag to help spread their spores and allow them to 'breathe'.
  • Soak the mushrooms in salt water for a few hours to kill harmful microbes.
  • Coat the mushrooms in breadcrumbs or beer batter and fry in butter for maximum enjoyment.

  • False Morel | Source
    Beware of poisonous mushrooms called 'false morels' that can be mistaken for real morels. Always make a positive identification and be sure that the cap and stalk of the mushroom are attached and hollow before eating any wild morels

Take it to the next level

With a little programming, you can turn your GIS data into an interactive app that works on your GPS enabled smartphone. This removes the guesswork and ensures that you always find the right spots! The open-source project Leaflet has a great community of friendly coders eager to help!

Do you have any other tips or tricks for finding morels? If so, leave them in the comments! Thanks for reading my post!

All images by the author unless otherwise noted. Some knowledge is sourced from personal experiences. See embedded links for sources and additional information.

Sort:  

This is a really awesome post! I forage and grow mushrooms myself, and run the website http://www.medicinalmushies.com. Great work! Following you!

Thanks for the follow! I am glad you enjoyed my post...I'm planning on doing some similar posts on other species in the future. Nice website, by the way!

This is one of the most useful morel hunting tip articles I've seen.
I'm not really tech-savvy and I've never heard of QGIS, but I'll give it a try this Spring.
Cheers!

thank you very much for share information.

This is by far the most comprehensive guide I've ever read for finding morels! Thank you! Resteemed and Favorited :)

Thanks, I am glad you think so...I tried to share everything that I have learned, but even with all of this knowledge they are still really difficult to find!

They're hard to find when you go looking for them, and then your neighbor has them pop up right in her front yard! haha

This was an awesome and extremely informative article. I've hear of GIS before, but I would never have thought of this application. Followed & RESTEEMED!

Heard a lot about morels, this is an interesting article about how and where to find them. 🐓🐓

Thank you! It may take a little research to locate them, but they are well worth the effort!

I was a little surprised to learn that you fry them up and eat them. I was thinking they would be served sautéed with something exquisite. I know they are an expensive delicacy. Thanks for stopping by. 🐓🐓

Hey great work here ! Is there any known connection between morels and different soil types that may be more suited for the soil moisture range you said they prefer? If so I would suggest looking into soil classification maps and overlay that tree data to refine a search.

Also if you look into multi-spectral data you could see if they have a specific reflectance value on a index such as NDVI (normalized difference vegetation index) where you could use open source software like QGIS or R/ RStudio to create classifications of pixels that would be considered a sample of morel!

Again, really cool work!

Thanks for the great questions! Since morels like a moderate level of moisture, a well-drained sandy or silty soil is often a hospitable location for them to thrive. The SSURGO data set is a great place to start if you are in the US. Filtering through this dataset and overlaying the desired soil types with forest boundary and tree stand data would be an excellent way to further refine the search.

As for the NDVI processing, I have worked a little with Landsat imagery and in theory this is totally possible. Getting the reflectance signature of the certain favorable trees seems within the reach of Landsat resolution. If you are wanting to find morel patches directly with spatial data, you probably need higher-resolution multiband imagery. Even with the resolution, you would need imagery from the right dates in early spring and tree leaf cover would probably conceal most patches. While the largest ones can grow as big as a basketball or larger, most are the size of a baseball or smaller.

I am glad to find another GIS enthusiast! Thanks again for your input.

Yes the Landsat imagery would be good for determining tree species, I have not used but am aware of some in-situ remote sensing devices that are for on the ground monitoring. I believe that you would be right though in that the leaf cover would crate too much of a challenge to use multi-spectral sensors. Looks like you will have to stick with the old school method of actually going to the sites in person!

It would be nice to build up a GIS community on Steemit where people can actually earn value for their contributions to others work around the world when answering or debating questions/ techniques.

I agree, there is a definite lack of spatial data posts on here and yet so many concepts that could be discussed and explored.

This post received a 80% upvote from @morwhale team thanks to @gra! For more information, click here! . this is @originalworks . steem @steemprice BTC

$4781.73 USD/BTC
Volume: 75873.23 BTC ($362805372.11 USD)
Last Updated Mon Oct 9 22:28:24 2017

The @OriginalWorks bot has determined this post by @gra to be original material and upvoted it!

ezgif.com-resize.gif

To call @OriginalWorks, simply reply to any post with @originalworks or !originalworks in your message!

To enter this post into the daily RESTEEM contest, upvote this comment! The user with the most upvotes on their @OriginalWorks comment will win!

For more information, Click Here! || Click here to participate in the @OriginalWorks sponsored writing contest(125 SBD in prizes)!
Special thanks to @reggaemuffin for being a supporter! Vote him as a witness to help make Steemit a better place!

Very good and interesting post. @gra :) I resteemed you!

Loading...

Congratulations @gra, this post is the forth most rewarded post (based on pending payouts) in the last 12 hours written by a Newbie account holder (accounts that hold between 0.01 and 0.1 Mega Vests). The total number of posts by newbie account holders during this period was 1373 and the total pending payments to posts in this category was $711.61. To see the full list of highest paid posts across all accounts categories, click here.

If you do not wish to receive these messages in future, please reply stop to this comment.