Que tan bueno es colocar un parcho a nuestros cauchos [SPA/ENG]

in Hive Motors9 months ago

Estoy seguro que habrá quienes reemplazan los cauchos de sus carros con regularidad, hace algún tiempo escribí al respecto, hay señales muy visuales que nos indican el momento de reemplazarlos, podríamos repasar algunas, pero a pesar de que nuestros cauchos estén en óptimas condiciones, no estamos exentos de que se perfore en el camino con algún objeto punzante.

How good is it to put a patch on our tires?

I am sure there will be those who replace the tires of their cars regularly, some time ago I wrote about it, there are very visual signs that indicate the time to replace them, we could go over some of them, but even though our tires are in good condition, we are not exempt from being punctured on the road with a sharp object.


01.jpg


sep_hivemotor.png

La tecnología alrededor del mundo automotriz a avanzado mucho, antes solucionar un pinchazo dependía del método que retrato en mis fotos, y aún está muy vigente este método en ciertas circunstancias, debemos retirarlo del vehículo, determinar con la ayuda de agua en una tina por dónde sale el aire, para sacarlo del rin y colocar un parcho, siempre y cuando el orificio no sea tan visible, aunque a veces están a simple vista.

The technology around the automotive world has advanced a lot, before fixing a puncture depended on the method that I portray in my photos, and this method is still very current in certain circumstances, we must remove it from the vehicle, determine with the help of water in a tub where the air comes out, to remove it from the rim and place a patch, as long as the hole is not so visible, although sometimes they are in plain sight.


03.jpg


sep_hivemotor.png

Este método aún es viable y vigente, pero han surgido alternativas que nos ayuda a nosotros mismos poder solucionar, he conocido dos que me parecen útiles y fáciles de aplicar por cualquiera sin necesidad de mucha destreza.

This method is still viable and in force, but alternatives have emerged that help us to solve ourselves, I have met two that I find useful and easy to apply by anyone without the need for much skill.


02.jpg


sep_hivemotor.png

El líquido para sellar pinchazos es muy variado, hay demasiadas marcas y muchos de ellos ofrecen la opción de colocarlos a través de la válvula de llenado de aire, lo que necesitaremos luego es contar con un compresor de aire para llenarlo, pero hoy en día hay pequeños compresores que alimentamos del voltaje del encendedor de cigarros del tablero del vehículo.

The liquid to seal punctures is very varied, there are too many brands and many of them offer the option of placing them through the air filler valve, what we will need then is to have an air compressor to fill it, but today there are small compressors that we feed from the voltage of the cigarette lighter of the vehicle's panel.


slime.jpg
Fuente


sep_hivemotor.png

El otro método que me llamó mucho la atención fue el de colocar a través del orificio del pinchazo una mecha de caucho con la ayuda de un punzón que se adhiere a al material y no permite que el aire se escape, la verdad no se que tan efectivo sea esta reparación, lo cierto es que tanto esta como la del liquido sella pinchazos solo podrían utilizarse para pequeños orificio.

The other method that caught my attention was to place through the puncture hole a rubber wick with the help of a punch that adheres to the material and does not allow air to escape, the truth is that I do not know how effective this repair is, the truth is that both this and the liquid seals punctures could only be used for small holes.


slime_plugs.jpg
Fuente


sep_hivemotor.png

Por eso el método de colocar una zapata o parcho no pasará de moda, siempre sera necesario para los orificios mas grandes, ademas creo personalmente que es mucho mas seguro y duradero que los métodos anteriores, aunque no me extraña que con el paso de los años aparezca un nuevo método que mejore todo lo anterior, o incluso que no haga necesario que tengamos que reparar neumáticos.

Therefore the method of placing a shoe or patch will not go out of fashion, it will always be necessary for larger holes, and I personally believe that it is much safer and more durable than the previous methods, although I am not surprised that over the years a new method appears that improves all of the above, or even that does not make it necessary to have to repair tires.


sep_hivemotor.png

Sort:  

Saludos amigo @danielcarrerag desconocía el método con la mecha, el otro nunca lo he usado, lo que si vi el otro día es que existen carros que se llenan automáticamente el caucho al espicharse, son carros de millonarios.

Eso es cierto, pero es tecnología que aún no llega a nosotros, quien sabe cuándo jeje

Algún día sera.

Congratulations!
Your post has been manually curated and reblogged.

You can follow our curation trail on Hive.Vote

If you want to support us and the authors we vote for you can upvote this comment or delegate some Hive Power to our account. Thanks!

Propose a worthy post by mentioning us in the post or in a comment.

We reblog curated posts, follow us if you wish to see them in your feed.

 9 months ago  

Esos métodos que mencionas en tu publicación no los conocía, siempre he sabido del método tradicional. Y por lo general se siente más confianza aplicar lo que conocemos lo demás nos puede generar desconfianza pero bueno no está demás tener una alternativa y más conocimientos. Gracias amigo @danielcarrerag. 👍🤗

Hola @rigel-gladys fijate que me gusto el de la mecha, pensé en ir por carretera y que te pase que mas de un caucho es atravesado por algo, usas el de repuesto, pero debes solucionar lo demás, parece trágico pero uno nunca sabe.

The best solution for leaky tires is patched, it looks like the old tires are thin, if they get hit by nails the can leak. Thanks for the comments. Greetings.

Yeah they are worn and are more prone to this type of puncture

Thank you are welcome.