Brake system service and maintenance | EN/ES

in Hive Motors3 years ago

frenos.jpg

Hello friends of Hive Motors,

In my region the rainy season has already started, a time when traffic accidents increase, sometimes due to recklessness of drivers, and sometimes due to the lack of preventive and corrective maintenance to the braking system.

Yesterday I lived the experience when in the middle of the rain the car in front of me braked abruptly, obviously I also braked, but my brakes did not respond 100%, I felt that it took a while to do it properly, fortunately nothing to regret, but that alerted me to make a service to the brakes of my car on my return home.

Hola amigos de Hive Motors,

En mi región ya comenzó la temporada de lluvias, una época en la que se incrementan los accidentes de tránsito, en ocasiones por imprudencias de los conductores, y en otras, por la falta de mantenimiento preventivo y correctivo al sistema de frenos.

Ayer viví la experiencia cuando en medio de la lluvia el carro que iba delante de mí frenó bruscamente, obviamente yo debí frenar también, pero mis frenos no respondieron al 100%, sentí que tardaron en hacerlo debidamente, afortunadamente no pasó nada que lamentar, pero eso me alertó para hacer una revisión a los frenos de mi carro al regresar a casa.

separador HM.png

When I got back, the first thing I did was to disassemble the front wheels, for this it is only necessary to have a piece of 120 grit sandpaper, a hard cell brush and a ratchet with a 9/16 die.

When I disassembled the front wheels I found what I already assumed, the brake discs were slightly crystallized, and when I took out the brake pads they were also crystallized and dirty with soot, so they needed to be serviced.

Al volver, lo primero que hice fue desarmar las ruedas delanteras, para esto solo es necesario tener un pedazo de papel de lija grano 120, un cepillo de celdas duras y un ratchet con un dado 9/16.

Cuando desmonté las ruedas delanteras comprobé lo que ya me suponía, los discos de freno estaban levemente cristalizados, y al sacar las pastillas de freno estaban también estaban cristalizadas y sucias de hollín, por lo que era necesario hacerles mantenimiento.


photo_2021-05-23_19-53-33.jpg

The first thing I did was to clean with a brush and water, the disc, the caliper and all components that are covered with all this dirt that is produced with the daily running-in, although it may not seem all this reduces the efficiency in the braking system.

Then I cleaned the brake discs by sanding them lightly with sandpaper and water, this removes that crystal layer that is created on them. This same procedure was also done with the brake pads, I rubbed them with sandpaper and water at the same time to remove excess soot and remove the layer that crystallizes them.

Lo primero que hice fue limpiar con un cepillo y agua, el disco, la mordaza y todos componentes que se encuentran cubiertos de toda esta suciedad que se produce con el rodaje cotidiano, aunque no lo parezca todo esto reduce la eficacia en el sistema de frenado.

Luego limpié los discos de freno lijándolos ligeramente con el papel de lija y agua, esto elimina esa película de cristal que se les crea. Este mismo procedimiento lo realicé también con las pastillas de freno, las froté con el papel de lija y agua al mismo tiempo para retirar el exceso de hollín y eliminar la capa que las cristaliza.

photo_2021-05-23_19-53-54.jpg
photo_2021-05-23_19-54-14.jpg
photo_2021-05-23_19-54-17.jpg

With everything cleaned up, I started to assemble, made sure to tighten the caliper bolts correctly, reassembled the wheels and adjusted. I went out for a ride in the car to test the brakes, I am very satisfied with the response of the brakes, now they work 100%.

With this type of maintenance I feel much more safe when braking fast, either on dry or wet pavement.

Remember that it is very important to take care of these details to avoid accidents, regularly check the condition of your brake pads and discs, if you see that layer of crystallization on them, you know how to solve the problem.

Ya con todo limpio, comencé a armar, me aseguré de ajustar los tornillos de la mordaza correctamente, monté nuevamente las ruedas y ajusté. Salí a dar una vuelta para hacer pruebas, y debo decir que me siento muy satisfecho con la respuesta de los frenos, ahora funcionan al 100%.

Con este tipo de mantenimiento me siento mucho más seguro a la hora de realizar un frenado rápido, bien sea sobre el pavimento seco o húmedo.

Recuerden que es muy importante cuidar estos detalles para evitar accidentes, revisen el regularmente el estado de sus pastillas y discos, si observan esa película de cristalización en ellos, ya saben como resolver el problema.

separador HM.png


All photographs in this post were taken by me with a Samsung S9 phone.

Todas las fotografías de esta publicación fueron tomadas por mi, con un teléfono Samsung S9.


Banner Gregcoin.gif

Sort:  

Your content has been voted as a part of Encouragement program. Keep up the good work!

Use Ecency daily to boost your growth on platform!

Support Ecency
Vote for Proposal
Delegate HP and earn more

Congratulations @gregcoin! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You received more than 3000 upvotes.
Your next target is to reach 3250 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Support the HiveBuzz project. Vote for our proposal!