Hi to all beloved readers,
Since Malaysia's government decided to announce the lockdown on 18th March 2020, our house moving plan needs to be immediately cancelled and postponed (We'd planned to move on 21st March 2020, what a heck!!!)
It's already the eleventh day we all staying at home.
Without wasting time, my brother and me made a decision to modify some of the unused furniture and turning it into a brand new "movable monitor chair".
Ok, here's the step by step renovation project:
Step 1: Unscrew all the screws from the chair and separate it carefully (the unscrewing process is quite easy, no much hassle at all)
Step 2: Attach the "Automatic Voltage Regulator" on the lower part of the chair, by placing screws underneath the chair
Step 3: Take a round pallet wood and drill two holes through it (the centre hole is to place the steel pole, while the hole in the back is to put all the wires go through it)
Step 4: Put all the monitor + speakers + wires on the round pallet wood and we're done!
It took about an hour to make this renovation and we're quite satisfy with the final product.
PS: We're going to take this "movable monitor chair" to our new house (might give it some new painting and make it even more stylish)
Thanks for reading folks and see ya~
各位敬爱的读者们好鸭，
由于马来西亚政府决定在2020年3月18日宣布锁国，因此我们的新屋搬迁计划需要立即被取消并延迟（我们原先计划在2020年3月21日搬迁，真是太无语了！！！）
我们已经呆在家里了十一天了（头上的蘑菇都快张满了）。
为了不白白让时间流逝，我和我弟决定修改一些旧有的家具，并将其转变成一个全新的“移动显示器椅”。
请看以下的逐步改造计划程序：
步骤1：把椅子上所有的螺丝给拧下，然后小心地将其拆分（螺丝拧开过程非常容易，一点也不麻烦）。
步骤2：将“自动电压调节器”安装到椅子下部，方法是在椅子下方锁上螺丝。
步骤3：取一个圆形的托盘木，并在其中钻两个孔（中心大孔用于放置显示器伸缩铁架，而背面的孔用于放置所有电线）。
步骤4：将所有显示器+扬声器+电线放在圆木托盘上，这样就大功告成了！
进行了大约一个小时的改装，我们对最终的产品非常满意。
PS：我们将把“移动显示器椅”带到我们的新房里（可能会给它上一些新漆，让它看起来更加时尚）。
感谢您的阅读，请大家拭目以待喔〜