Hi bloggers welcome to a new week
Read to the end and see how I made this beautiful zig it can be use on men cloth for the front flap placket or use to design the chest pocket.
I cut out 1.5" straight length make it long enough
Iron it into two to get the middle straight down.
I added emir gum, I put it at the centre and folded the the edge on the emir gum at the centre. I did that to all the length
Next is I cut out the fabric I will sew the design on which is 6" inches widenes and 14" inches long, added gum stay on it full then I place the other one have folded with iron at the centre of this like this below.
Then I bend it under from the left to go to the right like this below.
Then from the right you do the same this making the second bend from the right to go back to the left, doing this it will bring this triangle shape so make it very sharp at it edge like this below.
So I only sew the straight middle not letting the sewing to climb the sharp side like this below.
I did that to the end of the 14"inches .
So doing that I folded the edge of it to make it 2 inches of flap placket I want and fix to the front flap like this below.
Note this blog is only on the zigzag design.
The I processed to the pocket I have.
Make the 1.5"inches and I did it like I explained up there.
So I place it on the centre of my pocket and sew, same process of sewing for the flap placket.
That's how I made this beautiful zig zag design
Thanks for reading through and please like and comment let me know how good this is for you seeing it.
Thanks.
Wow, it such amazing flab design, it really promote your work, good job and well-done.
Yes
Thanks so much
The process of making any design exactly the same from start to finish is certainly very difficult, but you have done it. I really like your work. Keep sharing new ideas with us.
Yes you're right, it takes patients and putting mind and effort
Thanks for your encouraging words
!PAKX
View or trade
PAKXtokens.Use !PAKX command if you hold enough balance to call for a @pakx vote on worthy posts! More details available on PAKX Blog.
Thanks 🙏
Congratulations @hamokstitches! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)
Your next target is to reach 600 upvotes.
Your next target is to reach 100 replies.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPCheck out our last posts:
Thanks for this
All good @hamokstitches! You're a true Hive champion! Onward to that new goal!
BTW, our NEW proposal needs your support to continue bringing gamification and entertainment to Hive. Please consider supporting it and helping us out.
All you need to do is to click on the "support" button on this page: https://peakd.com/proposals/331.
Thank you!
This is really great to see. You're good at your designs and creativity 😘
Thanks I appreciate 😊