🪴Make a cute cart with recycled materials for your cacti and succulents 🧺🛒🌵[ES|EN]

in Hive Diy2 months ago (edited)

InShot_20250428_094855367.gif

🧶Bienvenido al mundo del DIY conmigo,un placer saludarles ☺️✨🎨. | 🧶Welcome to the world of DIY with me, a pleasure to greet you ☺️✨🎨.

¡Buenos dias mis amores!les deseo un hermoso día radiante de esta mañana,les traigo una idea súper genial de artesanía y material reciclado que puedes hacer en la comodidad de tu hogar para plantar cactus y suculentas ,sirve para hacer mini mundos de plantas pequeñas y adornar tu jardín y tus espacios interiores,si estás buscando algo sutil algo que puedas hacer en casa y sin gastar materiales está es la solución que buscas ,una linda carreta o carretilla pequeña para colocar tus pequeñas plantitas ,sirve también para adornar espacios y puedes meter dentro de ella cualquier cosa que se te ocurra aparte de plantas,en esta ocasión yo estaré plantando pequeños brotes de cactus de diferentes especies que tenia acá en mi casa y que las he cortado de otras plantas grandes que yo tengo en macetas.

Good morning my loves! I wish you a beautiful radiant day this morning, I bring you a super cool idea of crafts and recycled materials that you can do in the comfort of your home to plant cacti and succulents, it serves to make mini worlds of small plants and decorate your garden and your interior spaces, if you are looking for something subtle something that you can do at home and without spending materials this is the solution you are looking for, a nice small cart or wheelbarrow to place your small plants, it also serves to decorate spaces and you can put inside it anything you can think of apart from plants, on this occasion I will be planting small cactus shoots of different species that I had here at my house and that I have cut from other large plants that I have in pots.

Picsart_25-08-21_11-57-27-560.jpg

Para adornar mis plantas he decidido colocarle algunas piedras pequeñas que tenía en mi jardín para darle una temática más bonita de mini mundo ,te comparto el proceso de esta genial idea y los materiales que estaremos usando para empezar a hacer la carreta se ,que te gustará mucho y me alegraría que me cuentes al final después de ver los resultados que tal te ha parecido.🌿🌵🪴🌼

To decorate my plants I have decided to place some small stones that I had in my garden to give it a more beautiful mini world theme. I am sharing with you the process of this great idea and the materials that we will be using to start making the cart. I know that you will like it a lot and I would be happy if you could tell me at the end after seeing the results what you think. 🌿🌵🪴🌼

@anne002_20250723_195546_0000 (1).png


IMG_20250821_095547_674.jpg

@anne002_20250723_195546_0000 (1).png

Materiales: | Materials:

  • Aguja de punta gruesa
  • 2 tapas de bebida energizante
  • 1 envase de margarina
  • Silicón (preferiblemente en barra)
  • Pinzas
  • 3 palillos de madera para barbacoa
  • Esmalte de uñas del color que gustes (para mejor adherencia)
  • Paletas de helados
  • Tijera

  • Thick-tipped needle
  • 2 energy drink caps
  • 1 tub of margarine
  • Silicone (preferably stick)
  • Tweezers
  • 3 wooden barbecue picks
  • Nail polish in the color of your choice (for better adhesion)
  • Popsicle sticks
  • Scissors

@anne002_20250723_195546_0000 (1).png

Pasos a seguir: | Steps to follow:

IMG_20250821_095809_565.jpg

IMG_20250821_095834_984.jpg

IMG_20250821_100232_460.jpg

IMG_20250821_100828_450.jpg

Paso 01

El primer paso es colocar nuestro envase de margarina boca arriba y con la aguja con punta gruesa vamos a estar abriendo diferentes agujeros para que el agua pueda correr al sembrar nuestras plantas y la idea es que tenga este filtro nuestras plantas para que no mueran ahogadas entonces con estos agujeros el agua podrá salir fácilmente cada vez que reguemos las plantas,una vez lo abrimos vamos a cortar 5 cm de cada palillo de madera de barbacoa porque son muy largos y ya procedemos a pintar con nuestro esmalte los palillos y el borde de nuestro envase de margarina arriba..

Step 01

The first step is to place our margarine container upside down and with the thick-tipped needle we are going to be opening different holes so that the water can run when planting our plants and the idea is that our plants have this filter so that they do not drown then with these holes the water can easily come out every time we water the plants, once we open it we are going to cut 5 cm from each wooden barbecue stick because they are very long and then we proceed to paint the sticks and the edge of our margarine container with our enamel on top.


IMG_20250821_102335_188.jpg

IMG_20250821_103809_473.jpg

IMG_20250821_100843_722.jpg

IMG_20250821_102741_766.jpg

IMG_20250821_103753_008.jpg

Paso 02

Vamos a estar uniendo las tapas con silicón y luego con la aguja de punta gruesa la vamos a calentar con el encendedor y le abrimos dos agujeros por ambos extremos para luego tomar con un palillo de 4 cm o 3 cm aproximadamente y lo estaremos insertando entre ambas tapas para formar la rueda de nuestra carretilla y con el esmalte la vamos a pintar ,tomamos después nuestras paletas y estaremos cortando en la punta responde de ellas 3 cm de largo cada una o del largo que tiene nuestro envase en la parte de los costados lo medidos y por una guia como referencia vamos a cortarlas todas las que necesitamos y con una lima vamos a limar el borde que nos ha quedado filoso con la madera y vamos a hacer agujeros en el envase en al parte de atras medimos los palillos la parte de atrás los agujeros son más anchos que los de adelante ,así vamos a insertar de una vez los palillos largos por los agujeros que hemos hecho con la aguja..

Step 02

We are going to be joining the lids with silicone and then with the thick-tipped needle we are going to heat it with the lighter and open two holes at both ends and then take a toothpick of approximately 4 cm or 3 cm and we will be inserting it between both lids to form the wheel of our wheelbarrow and with the enamel we are going to paint it, then we take our palettes and we will be cutting at the tip responds to them 3 cm long each or the length of our container on the sides what is measured and by a guide as a reference we are going to cut all the ones we need and with a file we are going to file the edge that has been left sharp with the wood and we are going to make holes in the container in the back we measure the toothpicks the back the holes are wider than the front ones, so we are going to insert the long toothpicks at once through the holes that we have made with the needle.


IMG_20250821_104659_489.jpg

IMG_20250821_105538_171.jpg

IMG_20250821_105752_760.jpg

IMG_20250821_110106_500.jpg

Paso 03

Procedemos después a pegar una a una de madera vertical nuestras paletas por todo el borde del envase que no hemos pintado lo fuí pegando poco a poco luego pegamos la rueda en la parte delantera de los palillos ubicando los palillos de manera que no nos quede muy abajo, después con otro palillos pequeño de 3 cm aproximadamente lo estaré ubicando cerca de la rueda lo pegué por la parte de abajo con silicón dejé secar y lo volví a pintar.

Step 03

We then proceed to glue our palettes one by one, vertically, along the entire edge of the container that we have not painted. I glued it little by little. Then we glued the wheel to the front of the sticks, placing the sticks so that they are not too low. Then, with another small stick of approximately 3 cm, I will be placing it near the wheel. I glued it to the bottom with silicone, let it dry, and painted it again.


IMG_20250821_110115_152.jpg

Paso 04

Por último tomé dos palillos de 5 cm y los pinté, entonces en los extremos donde hemos hecho los agujeros bajo el envase estaremos colocando uno lado a lado en cada extremo y lo voy a pegar en la parte de arriba de los palillos que inserté está será la base de apoyo que nos servirá para sostener la carreta ,una vez terminé dejé secar la pintura al sol y me propuse echarle arena para sembrar los cactus.

Step 04

Finally I took two 5cm sticks and painted them, then at the ends where we made the holes under the container we will be placing one side by side at each end and I will glue it on top of the sticks that I inserted. This will be the support base that will serve to hold the cart. Once I finished I let the paint dry in the sun and I proposed to add sand to plant the cacti.


@anne002_20250723_195546_0000 (1).png

Resultado: | Result:

Miren que bonito resultado con los cactus y suculentas ya plantados ,le coloqué las piedras que les mencioné al principio que tenía en mi jardín para adornar mis cactus por alrededor ,se ve linda está bonita carreta , cuéntame entonces que tal te ha parecido y si ya has hecho este tipo de manualidades con materiales reciclados,en mi caso es la primera vez y oara serlo siento que quedó bien ,aunque si hay cosas que me hacen falta aprender poco a poco y con paciencia lo voy a lograr ☺️🌵,me despido cariñosamente de ustedes , saludos..❤️🥺👉🏻👈🏻

Look what a beautiful result with the cactus and succulents already planted, I placed the stones that I mentioned at the beginning that I had in my garden to decorate my cactus around, this beautiful cart looks nice, tell me then what you thought and if you have already made this type of crafts with recycled materials, in my case it is the first time and to be one I feel that it turned out well, although there are things that I need to learn little by little and with patience I will achieve it ☺️🌵, I say goodbye affectionately to you, greetings .. ❤️🥺👉🏻👈🏻

IMG_20250821_111215_546.jpg

IMG_20250821_111217_709.jpg

IMG_20250821_111349_556.jpg

IMG_20250821_111344_468.jpg

@anne002_20250723_195546_0000 (1).png

Creando las cosas con amor🌷♥️ | Creating things with love🌷♥️

Imágenes:de mi autoria | Edición:Canva® y PicsArt © | Traductor:Traductor de Google | Dispositivo:TecnoSpark 8C.

Images:my own work | Edited by:Canva® and PicsArt © | Translator:Google Translate | Device:TecnoSpark 8C.


Neutral Simple Minimalist Lifestyle Blogger YouTube Channel Art _20250625_130338_0000.png


Sort:  
 2 months ago  

Hola Anne, tu publicación e idea es estupenda, sin embargo para nuestra comunidad, es importante atiendas a algunas de las reglas que están descritas en nuestro post, para ser especifico la regla N°1 y así estés más alineada al espíritu y las normas de nuestra comunidad, siendo un ejemplo no solo en tus publicaciones sino en todo lo que corresponde a nuestro nicho. Asegúrate que sea tal y como indica en el post ya que estas usando una cuenta que no tiene que ver con nuestra comunidad DIY, de esta manera podremos crecer y brindar mayor apoyo, cada granito cuenta.

https://peakd.com/hive-130560/@hive-130560/actualizacion-de-nuestras-reglas-en-la-comunidad-updating-our-community-rules-espeng


Your reply is upvoted by @topcomment; a manual curation service that rewards meaningful and engaging comments.

More Info - Support us! - Reports - Discord Channel

image.png
Curated by roadstories

Que bonita idea💖 me encanta que incluya materiales de reciclaje, así no solo es muy bonito sino que además le da una segunda oportunidad a estos materiales☺️

This is such a cool and fun way for using recycled materials and turning them into a useful craft. We appreciate your creativity, well done.


selected by @ibbtammy

Esta precioso está manualidad, y adorable! Me encanta para poner los pequeños brotes

Quedó muy lindo, gracias por compartir 😊