(01/11/2025)✨Tutorial🪢✨~🇺🇲Let's make a stamp🦋🎨💟🫟🖌️~🇪🇦Hagamos un sello🦋

in Hive Diy19 days ago (edited)

•Collage & Edition in Canva, photos by @karenyasmin

🇪🇦 ~ Hola querida comunidad, espero que estén muy bien dondequiera que se encuentren. Hoy les traigo el tutorial sobre como hacer un sello de mariposa utilizando materiales que pueden encontrar en casa. 🏠
En mi ciudad, no es muy habitual ver sellos en las papelerías, solo en algunas, pero suelen ser muy pequeños, así que decidí hacer uno yo misma.

🇺🇲 ~ Hello dear community, I hope you are all doing well wherever you are. Today I bring you a tutorial on how to make a butterfly stamp using materials you can find at home. 🏠

ln my city, it's not very common to see stamps in stationery stores, only in a few, but they tend to be very small, so I decided to make one myself.

°TOOLS AND MATERIALS°

🇪🇦 Las herramientas y materiales que utilizaremos para elaborar este sello son: tijeras, lápiz, regla, pintura al frío verde y negra, acuarelas de colores, cartón reciclado, la parte de arriba de un mortero para ajo, silicón líquido, pinceles, alcohol etílico y recipiente con agua.

🇺🇲The tools and materials we will use to make this stamp are: scissors, pencil, ruler, green and black cold paint, colored watercolors, recycled cardboard, the top of a garlic mortar, liquid silicone, paintbrushes, ethyl alcohol and container with water.

•Reference image of a garlic mortar taken from Pinterest•

NOTA: Encontré la parte superior del mortero para ajo entre algunas cosas que mi tía estaba tirando y pensé que podría reutilizarlo.✨

NOTE: I found the top part of the garlic mortar among some things my aunt was throwing away, and I thought I could reuse it.✨

🇪🇦 ~[PASO 1] Comenzaremos pintando la parte superior del mortero con el pincel y la pintura al frío negra (se recomienda aplicar aproximadamente dos capas a la pieza de madera para intensificar el color).

🇺🇲 ~[STEP 1] We will start by painting the top of the mortar with the brush and black cold paint (it is recommended to apply approximately two coats to the piece of wood to intensify the color).



🇪🇦 ~ [PASO 2] Con la pintura al frío verde, añadimos detalles a la parte inferior, creando un efecto de hierba y hojas. Esperamos a que se seque.

🇺🇲 ~ [STEP 2] Using the green cold paint, we proceed to add details to the lower part, creating an effect of grass and leaves. We wait for it to dry.



🇪🇦 ~ [PASO 3] Sumerja el pincel en un recipiente con agua para humedecer la acuarela amarilla y simule flores amarillas sobre la hierba.

Esperamos a que se seque y, con un pincel limpio, aplicamos acuarela naranja para añadir detalles al centro de las flores.

🇺🇲 ~ [STEP 3] Dip the brush in a container of water to moisten the yellow watercolor and simulate yellow flowers on top of the grass.

We wait for it to dry and, using a clean brush, we apply orange watercolor to add detail to the center of the flowers.



🇪🇦 ~ [PASO 4] Tome un trozo de cartón reciclado y mídalo con una regla, midiendo 6 cm de ancho por 5 cm de alto. Utilice unas tijeras para cortar dos trozos de cartón con las mismas medidas. Y cortamos cada esquina del cartón como se muestra en la foto.

🇺🇲 ~ [STEP 4] Take a piece of recycled cardboard and measure it with a ruler, measuring 6 cm wide by 5 cm high. Use scissors to cut two pieces of cardboard with the same measurements. And we cut each corner of the cardboard as shown in the photo.



🇪🇦 ~ A continuación, procedemos a pegar ambas piezas con silicona líquida.

🇺🇲 ~ Then we proceed to glue both parts together with liquid silicone.



🇪🇦 ~ [PASO 5] Una vez que ambas partes pegadas estén secas, pinta ambas superficies con el pincel y la pintura al frío negra.

🇺🇲 ~ [STEP 5] Once both glued parts are dry, paint both surfaces with the brush and black cold paint.

🇪🇦 ~ Por un lado, pintamos la hierba y las hojas, dejando un círculo en el centro donde pegaremos la base del mortero.

🇺🇲 ~ On one side, we paint grass and leaves, leaving a circle in the middle where we will glue the base of the mortar.

🇪🇦 ~ [PASO 6] Buscamos en Pinterest imágenes de sellos de mariposas para utilizarlas como guía para crear nuestra mariposa. Puedes elegir la que más te guste.

🇺🇲 ~ [STEP 6] We search Pinterest for references of butterfly stamp images to use as a guide for making our butterfly. You can choose the one you like best.



•Image taken from Pinterest


🇪🇦 ~ [PASO 7] Tome un trozo de foami del color que prefiera y utilice una regla para medir 5 cm de ancho por 4,5 cm de largo para trazar su mariposa. A continuación, corte por todos los bordes trazados

🇺🇲 ~ [STEP 7] Take a piece of foam in any color you like and use a ruler to measure 5 cm wide by 4.5 cm long to trace your butterfly. Then cut along all the traced edges.



🇪🇦 ~ [PASO 8] Con otro trozo de foami, dibuja el contorno de otra mariposa un milímetro más grande que la anterior y pégala junto con la mariposa que ya has recortado.

🇺🇲 ~ [STEP 8] Using another piece of foam, trace the outline of another butterfly one millimeter larger than the previous one and glue it together with the butterfly you have already cut out.



🇪🇦 ~ [PASO 9] Pega la mariposa recortada anteriormente sobre el cartón que has recortado y pintado de negro.

🇺🇲 ~ [STEP 9] Glue the butterfly you cut out earlier onto the cardboard you cut out and painted black.



🇪🇦 ~ [PASO 10] Por último, unimos las piezas para formar nuestro precioso sello de mariposa.

🇺🇲 ~ [STEP 10] Finally, we put our pieces together to form our beautiful butterfly stamp.



🇪🇦🌼NOTA🌼 Para dar brillo a nuestras piezas, elaboramos un barniz casero con alcohol y silicon líquido, utilizando partes iguales de cada ingrediente, que mezclamos y luego aplicamos.

🇺🇲🌼NOTE🌼 To give our pieces that shine, we make a homemade varnish with alcohol and liquid silicone, using equal parts of each ingredient, which we mix together and then apply.

🌻📸Texts & photographs by @karenyasmin🌻
⚙️Tools 📲 Smartphone📸
🎬Collage & Edition in Canva
🦋Images taken from Pinterest🦋
📑Text translated in:Deepl
Discord💌#karen.yasmin
🪧Text separator:Canva
•ALL RIGHTS RESERVED •

Sort:  

Congratulations @karenyasmin! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You received more than 50 upvotes.
Your next target is to reach 100 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Check out our last posts:

Feedback from the November Hive Power Up Day
Hive Power Up Month Challenge - October 2025 Winners List
Be ready for the November edition of the Hive Power Up Month!

Handmade stamp
This is so nice
Thanks for sharing to the community

Thank you very much! Your comment encourages me to continue sharing my creations. 🤗

Keep it up dear friend

Hermoso sello, hecho a mano, amiga creo que hay un error en los comandos, las letras del post están dispersas.

Así se ve:

mn.png

Saludos!

Muchas gracias por tu observación, el post lo hice en un teléfono y aún no estoy experta. Voy a solucionarlo 🤓

Ok amiga poco a poco irás mejorando 👍