How has this year been treating you dear friends of Hive DIY? Welcome to my post once again, I'm Nitsu and today I think I'll share a short post but I'm very proud of it, since a long time ago I wanted to make something that had lights using my 3D printers and I was given the opportunity to make a gift candlestick, it would have been better to make my own design much more interesting but as time is short I looked for one already designed on the internet.
¿Qué tal los viene tratando este año queridísimos amigos de Hive DIY? Bienvenidos a mi post una vez más, soy Nitsu y hoy creo que compartiré un posteo corto pero del que estoy muy orgulloso, ya desde hace muchísimo tiempo quería hacer algo que tuviera luces utilizando mis impresoras 3D y se me dio la oportunidad de hacer un velador de regalo, lo mejor hubiera sido poder hacer un diseño propio mucho más interesante pero como el tiempo apremia busque uno ya diseñado por internet.
I found this model that you will see in the photos, quite simple because it had two parts, the light diffuser that I printed in white, with other colors could be better but I decided to play it safe and on the other hand a violet base where the lighting system would fit.
Encontré este modelo que estarán viendo en las fotos, bastante sencillo ya que contaba de dos partes, el difusor de luz que lo imprimí de color blanco, con otros colores podía quedar mejor pero decidí ir a lo seguro y por otro lado una base violeta donde encastraría lo que es el sistema de iluminación.
In total both pieces together will have taken about 8 or 9 hours of printing which seems to me quite acceptable and for the morphology that have no major complication when making them, and talking about the electrical section I had to get some things that I did not have.
En total ambas piezas juntas habrán tardado unas 8 o 9 horas de impresión lo cual me parece bastante aceptable y por la morfología que tienen no tuve mayor complicación a la hora de realizarlas, ya hablando del apartado eléctrico tuve que conseguir algunas cosas que no tenía.
I bought an energy saving led lamp, a meter and a half of cable, a switch, the lamp holder and a plug for the socket. All this does not have much science behind, two ends of the cable are connected to what is the tab for the socket, the other two (respecting the position) to the lamp holder and in the middle the switch to cut the power, I checked that everything was correct and did a test by connecting it to see if it turned on and there were no problems.
Compre una lampara led de bajo consumo, un metro y medio de cable, un switch, el porta lámparas y una ficha para él toma corrientes. Todo esto no tiene mucha ciencia detrás, se conectan dos extremos del cable a lo que es la ficha para él toma corrientes, las otras dos (Respetando la posición) al porta lámparas y en el medio el interruptor para cortar la energía, verifiqué que todo estuviera correctamente e hice una prueba conectándolo para ver si encendía y no había problemas.
Once I had the electrical part ready, I had to assemble everything in the printed piece, the good thing is that it has a super simple fitting system, assemble the printed parts and enjoy the beautiful lighting offered by this simple lamp. I hope in the future I can create my designs to be unique, bring extravagant forms that generate more beautiful lights and shadows but at the same time be useful.
Ya una vez tuve la parte eléctrica lista quedo montar todo en la pieza impresa, lo bueno es que tiene un sistema de encastre super sencillo, montar las partes impresas y disfrutar de la hermosa iluminación que ofrece esta sencilla lámpara. Espero más adelante poder crear mis diseños para que sean únicos, traer formas extravagantes que generen luces y sombras más bellos pero que a la vez sea de utilidad.
My 3D printing works @nit_3dprinting
Mis trabajos de impresión 3D @nit_3dprinting
Translated by DeepL
Traducido con DeepL
All images are my own
Todas las imágenes son de mi autoría
My last post Little Nightmares 2: A Nightmare in the Eternal Night
Saludos amigo, luce bien su velador. En lo particular le aplaudo que no le dé pena usar diseños que existan, cuando se fabrica un nuevo coche uno no comienza a inventar la rueda.
Estoy seguro de que con el tiempo creara su propio concepto original, uno siempre inicia a partir de lo que ya está creado. Sé de personas que quisieron iniciar sus proyectos, desde cero con un concepto rompedor y original y eso les retraso.
No pierdas el impulso, y mucho ánimo.
Ey, en serio muchísimas gracias por tus palabras, la verdad que usar este diseño ya hecho me ayudó a ver lo simple que puede ser un velador y aun existe la posibilidad de simplificar más el ensamblaje. Solo toca ver el diseño, pero de a poquito, muchisimas gracias por pasarte.
It looks amazing. The light is neither too strong nor too dim, it's perfect to have on the desk.
I thought the same thing, it is an exact light to illuminate and not to disturb the view, I was very surprised by this result. How great that you are so observant, thank you very much for commenting.
Excelente, quedó muy original, que dicha poder imprimir tus ideas en 3D jj. Felicidades,y gracias por compartir. Saludos
Muchas gracias por pasarte y tomarte un tiempo para dejarme tu comentario, no pensaba traer este posteo pero me anime y aqui esta jajaja
Congratulations @nitsuga12! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)
Your next target is to reach 55000 upvotes.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOP