TUTORIAL: ELABORACIÓN PENDIENTES◻️/TUTORIAL: ELABORATION PENDING◻️ /ESPAÑOL-ENGLISH.

in Hive Diy2 years ago (edited)

Screenshot_2022-02-07-18-47-31-12_3a637037d35f95c5dbcdcc75e697ce91.jpg

Hola hola amigos y amigas, tengan todos un día genial, nuevamente paso por acá para compartir con ustedes un nuevo tutorial para la elaboración de unos hermosos y elegantes pendientes, los elaboré usando material reciclado, una pequeña lámina de plástico.

Hello friends, have a great day everyone, I'm here again to share with you a new tutorial for making beautiful and elegant earrings, I made them using recycled material, a small plastic sheet.

Screenshot_2022-02-07-19-09-47-92.jpg

Para elaborarlos use la técnica de alambrismo, así que vengan conmigo para mostrarles como los elaboré, Los materiales a utilizar son los siguientes:

To make them I used the wire technique, so come with me to show you how I made them. The materials to use are the following:

◻️MATERIALES

-Alambre de Cobre fino.

  • lámina de plástico.
    -pinza.
    -tijera.

◻️MATERIALS

-Fine copper wire.
-plastic sheet.
-gripper.
-scissor.

PASO A PASO

STEP BY STEP

1. Lo primero que realicé fue tomar mi lámina de plástico la cual reciclare, de ella con la tijera corte un rectángulo el cual doble a la mitad y corte así obtuve las dos piezas que conforman los pendientes.

1 .The first thing I did was take my plastic sheet to recycle, from it with scissors I cut a rectangle which I folded in half and cut like this I obtained the two pieces that make up the earrings.

Screenshot_2022-02-07-19-07-15-04.jpg

2. Luego tomé el alambre de cobre elabore una argolla la cual ubique en la parte media de la parte superior del plástico, y comencé a tejer hacia abajo y luego hacia arriba.

2 . Then I took the copper wire and made a ring which I placed in the middle of the top of the plastic, and started weaving down and then up

Screenshot_2022-02-07-19-07-58-77.jpg

Screenshot_2022-02-07-19-08-05-96.jpg

3. Al llegar al punto de inicio, realice 4 vueltas en la base de la argolla, corte el sobrante y así obtendremos los pendientes.

3 . Upon reaching the starting point, make 4 turns at the base of the ring, cut the excess and thus we will obtain the earrings..

Screenshot_2022-02-07-19-08-16-80.jpg

De la misma manera realice el otro pendiente.

In the same way make the other earring.

Screenshot_2022-02-07-19-08-46-90.jpg

Así obtuve mi espectacular y nuevo accesorio!

That's how I got my spectacular new accessory!

listo, RESULTADO FINAL

voila, FINAL RESULT

Screenshot_2022-02-07-19-08-58-77.jpg

Screenshot_2022-02-07-19-10-03-50.jpg

Screenshot_2022-02-07-19-10-24-28.jpg

Feliz de compartir con ustedes mi creación, espero haya sido de su agrado! Pueden encontrar más tutoriales cómo está en mi blog, variados estilo de accesorios será hasta una próxima oportunidad!

Fotografías propias tomadas con mi REALME 7i

Own photographs taken with my REALME 7i

Portada: diseño propio creado en PicsArt/ own design created in PicsArt