DİY Concept: Making a Pickup Truck with Toothpick

in GEMS4 years ago

IMG_20200930_172033.jpg

(EN) Hello Hive Family. I made a very nice truck for you. I've been dealing with this truck for about 2 days. It was a little difficult. But the result was excellent. :))

(TR) Merhaba Hive Ailesi. Sizlere çok güzel bir kamyonet yaptım. Bu kamyonet ile yaklaşık olarak 2 gündür uğraşıyorum. Biraz zor oldu. Ama sonuç mükemmel oldu. :))

IMG_20200929_124909.jpg

(EN) Materials as a priority; toothpick, glue, scissors, hot silicone gun. I wanted to make a led light for the truck. But there is no space left for the LED lamp. :))

(TR) Öncelik olarak malzemeler; kürdan, yapıştırıcı, makas, sıcak silikon tabancası. Kamyonete led lamba yapmak istiyordum. Fakat, led lamba için yer kalmadı. :))

IMG_20200929_164025.jpg

(EN) First, I built the chassis of the truck and glued the wheels of the truck.

(TR) İlk önce, kamyonetin şasesini oluşturdum ve kamyonetin tekerleklerini yapıştırdım.

IMG_20200930_114749.jpg

(EN) Next, I created the back of the truck as you can see in the picture and then I started to the front of the truck.

(TR) Sonra, Resimde gördüğünüz gibi kamyonetin arka kısmını oluşturdum ve sonra kamyonetin ön kısmına başladım.

IMG_20200930_145537.jpg

(EN) After the Front of the truck was finished, I glued the rear view mirrors.

(TR) Kamyonun ön kısmı da bittikten sonra dikiz aynalarını yapıştırdım.

IMG_20200930_163457.jpg

(EN) Then I glued the truck's steering wheel, gear knob, and accelerator pedals.

(TR) Daha sonra, kamyonetin direksiyon, vites topuzu ve gaz pedallarını yapıştırdım.

IMG_20200930_172033.jpg

(EN) After all the procedures are finished, the truck is ready for a tour. :))

(TR) Bütün işlemler bittikten sonra, artık kamyonet gezmek için hazır. :))

(EN) Thank you for reading. Thanks for your supports.

(TR) Okuduğunuz için teşekkür ederim. Destekleriniz için teşekkürler.

Sort:  

It seems easy, but there is a lot of work behind it.

Nice. To make something like this, you need concentration and, above all, time. Thanks for sharing. 😎

Congratulations, your post has been upvoted by @dsc-r2cornell, which is the curating account for @R2cornell's Discord Community.

Manually curated by @jasonmunapasee

r2cornell_curation_banner.png

Really Beautiful DIY Craft .

Thnks :)

Such an amazing art work sir, I am sure its a very time talking process but at the end it beeter great ⁦✌️⁩🙏

@bhattg Thank you so much :))

Amazing!!!

@stefano.massari Thank you so much :))