**Un saludo a toda la comunidad de HIVE, quiero compartir con ustedes la manera mas facil y rapida de hacer un hermoso lazo para niñas. **
Greetings to all the HIVE community, I want to share with you the easiest and quickest way to make a beautiful bow for girls.
Para esto necesitaremos lo siguiente;
Silicon el de su prefencia, puede ser frio ó caliente, yo escogí el frio.
Foami el color que desee y fieltro.
1 hoja bien sea blanca o de reciclaje.
Tijera
Lapiz
Cinta metrica
Gancho
Y manos a la obra.
For this we will need the following;
Silicon of your choice, it can be cold or hot, I chose the cold one.
Foami the color of your choice and felt
1 sheet either white or recycled
Scissors
Pencil
Measuring tape
Hook
And let's get to work.
Paso 1: toman la medida para empezar a hacer el patron, el tamaño varia dependiendo la edad, en esta oportunidad, las medidas son las siguientes:
Step 1: take the measure to start making the pattern, the size varies depending on the age, in this opportunity, the measures are as follows:
Les recomiendo que su primer lazo lo hagan con esta medida, ya luego toman sus propias medidas.
I recommend that you make your first loop with this measurement, and then take your own measurements.
Paso 2: doblamos cada uno tal cual aparece en la foto, luego marcamos y picamos, si equivocan les saldra mal.
Step 2: Fold each one as it appears in the photo, then mark and cut, if you make a mistake it will come out wrong.
Luego abrimos y nos tiene que quedar asi, sino les queda asi esta mal.
Then we open it and it has to look like this, if it doesn't, it is wrong.
Esto lo vamos a repetir con el papelito que tiene marcado las medidas 14×4cm.
We are going to repeat this with the paper that has the 14×4cm measurements marked on it.
Paso3: el papel con la medida 10×4,5 lo haremos de la siguiente manera:
Step 3: The paper with the size 10×4.5 is made as follows:
Marcamos las puntas que unieron para luego picar y nos quedara asi.
We mark the ends that joined and then chop and we will be like this.
Volvemos a marcar y contar. Fíjense bien para que lo hagan perfecto.
We go back to marking and counting. Watch carefully so that you get it perfect.
Al cortar abrimos y tiene que quedar asi.
When cut open and it should look like this.
Paso 4: una vez teniendo los patrones, procedemos a marcar en el foami y el fieltro para cortar, pegar y unir.
Step 4: Once we have the patterns, we proceed to mark on the foami and felt to cut, glue and join.
Con el foami plateado picamos una tirita para colocarla en el centro y unir todas las piezas.
With the silver foami we cut a strip to place it in the center and join all the pieces together.
Paso 5: pegamos el gancho.
Step 5: glue the hook
Y listo tenemos nuestro lazo.
And ready we have our ribbon.
Espero que les haya gustado y les sea muy útil.
I hope you liked it and find it very useful.
Congratulations @experinces.job! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :
Your next target is to reach 300 upvotes.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPCheck out the last post from @hivebuzz: