Good morning everyone,
This morning I want to share with us my latest creation which is a lovely male slides. It is a while since I made shoes so I decided to pause my other crafts to make some shoes. I've actually made few which I'll be sharing with us subsequently. Last night I was able to complete the creation of this slide because its to be delivered today. I had to work on two slides yesterday and the work was much but thankfully my two little brother's were there to help me as they also used the opportunity to learn from me.
Below I'll be sharing with us the process of making this slide.
MATERIALS USED
- Cardboard
- Nora
- Maco 4
- Leather
- Fibre
- Gum
- Leather glue
- Wett
PROCESS
- The first thing I did was to mark out the pattern on the Nora and a reduced pattern for on the maco (which will be the insole). After marking, I cut them out. Next I gummed the maco to the fibre and trimmed the edges out.
- Here I marked the upper strap on the leather, cut it out and gum it on a lining and also trim the edges out.
- I filled the edges of the gummed maco and fibre and I cappednit by gumming a light black leather around it.
- Next I applied gum on the Wett and on the Nora, the middle of the Nora and middle of the capped maco. Then I gummed it on the Nora and gum the wett around the capped maco as seen below.
- After that I removed the maco, trimmed the excess Nora out, gummed the heels with the wet Nora and filled the edges.
- Here I filled the edge of the straps, mark where to last it on the capped Maco.
- Finally I gummed the wet Nora with the capped Maco.
Final look
Congratulations @gloriaolar! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :
Your next target is to reach 76000 upvotes.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPTo support your work, I also upvoted your post!
Check out the last post from @hivebuzz:
Thank you for sharing this amazing post on HIVE!
Your content got selected by our fellow curator @stevenson7 & you just received a little thank you via an upvote from our non-profit curation initiative!
You will be featured in one of our recurring curation compilations and on our pinterest boards! Both are aiming to offer you a stage to widen your audience within and outside of the DIY scene of hive.
Join the official DIYHub community on HIVE and show us more of your amazing work and feel free to connect with us and other DIYers via our discord server: https://discord.gg/mY5uCfQ !
If you want to support our goal to motivate other DIY/art/music/homesteading/... creators just delegate to us and earn 100% of your curation rewards!
Stay creative & hive on!