[ENG-ESP] Making a homemade Super Massager // Haciendo un Súper Masajeador casero

in GEMS4 years ago (edited)

Making a homemade Super Massager

Haciendo un Súper Masajeador casero


Greetings to all my dear readers, after disappearing for two days thanks to a problem with the internet services server, I am here again with you to share a super useful manual that will help any sore neck to overcome its ills. I will be presenting a Super Electric Massager, which in my case had a cost of 0 $.

Saludos a todos mis queridos lectores, luego de desaparecer por dos días gracias a un problema con el servidor de servicios de internet, me encuentro nuevamente acá con ustedes para compartir una manualidad súper útil, que ayudara a cualquier cuello adolorido a superar sus males. Les estaré presentado un Súper Masajeador eléctrico, que en mi caso tuvo un costo de 0 $.


After stressing a little because of the internet problem, I came up with something that would help relieve the tension in my sore neck, that's when I came up with the idea of using something that can go through my skin without generating friction and at the same time "vibrate" enough to relax me.

Luego de estresarme un poco por el problema del internet, se me ocurrió realizar algo que fuera de ayuda para aliviar la tensión de mi adolorido cuello, es entonces cuando se me ocurre la idea de utilizar algo que pueda pasar por mi piel sin que genere fricción y al mismo tiempo “Vibre” lo suficiente para relajarme.


Finally after searching and searching among materials I got the package of a roll-on deodorant and a small printing engine the base materials for this relaxing massager.

Finalmente luego de buscar y buscar entre materiales conseguí el envase de un desodorante roll-on y un pequeño motor impresora los materiales bases para este relajante masajeador.


The materials and tools I used were:

  • Roll-on container
  • Printer engine
  • Something that works as a counterweight (in my case I used an internal part of an outlet, which had a screw in it)
  • 5V current transformer (from an old cell phone)
  • Silicone
  • Tin
  • tweezers
  • cutter
  • Caution
  • Much love!!

Los materiales y herramientas que use fueron:

  • Envase de roll-on
  • Motor de impresora
  • Algo que funcione como contrapeso (en mi caso use una pieza interna de un tomacorriente, que tenía tornillo)
  • Transformador de corriente de 5V (de un celular viejo)
  • Silicona
  • Estaño
  • pinzas
  • cúter
  • Cautín
  • Mucho cariño!!


The first thing I did was to make a guide where I wanted the engine to be and cut it (you can see how I cut it in the photo)
Lo primero que hice fue realizar una guía donde quería que estuviera el motor y cortar (pueden ver como lo corte en la foto)



Now, take the part of the outlet and adjust it to the motor shaft with the screw of the same and with the clamps remove the long parts leaving only the block. This is to generate the vibration.
Ahora, tome la pieza del tomacorriente y la ajuste al eje del motor con el tornillo de la misma y con las pinzas le quite las parte largas dejando solo el bloque. Esto es para que genere la vibración.


This is the most important part, since the cables that will give life to our massager will be fixed to the motor, we will solder the cables no matter the order since it doesn't really matter where it turns. In my case I had to secure the cable as the charger was short and I added a longer piece of cable. And we fixed all the connections with silicone
Esta es la parte más importante, ya que se fijara al motor los cables que le darán vida a nuestro masajeador, soldaremos los cables sin importar el orden ya que no importa realmente hacia donde gire. En mi caso tuve que asegurar el cable ya que el cargador quedaba corto y agregue un trozo de cable más largo. Y fijamos todas las conexiones con silicón


now we proceed to introduce the motor inside the package and fix it with eva rubber or carton, then we cover and test
ahora procedemos a introducir el motor dentro del envase y lo fijamos con goma eva o cartón, luego tapamos y probamos


The only thing left to do is to decorate it to give it a more attractive presentation, although it can also fulfil its function.
Ya solo quedara adornarlo para darle una presentación más atractiva, aunque así mismo ya puede cumplir su función.



Ready already decorated, we will have our home massager made with useful materials and at 0$.
Listo ya adornado, tendremos nuestro masajeador casero realizado con materiales de provecho y a 0$.


This has been the post of the day! I hope it is to everyone's liking and that this manual is useful and can serve you in your day-to-day life. I recommend it because it is very powerful and does not harm the skin. See you in the next post wants you @shirahoshi

Este ha sido el post del día! Espero que sea del agrado de todos y sea de provecho esta manualidad y pueda servirles en su día a día, se los recomiendo ya que es muy potente y no maltrata la piel. Nos vemos en el próximo post los quiere @shirahoshi



The photographs are my own and were taken by me with a sony cybershot DSC-S2000 and were edited in powerpoint.

Las fotografías son de mi autoría y fueron tomadas por mí con una camara sony cybershot DSC-S2000 y se editaron en powerpoint.


The Step by Step Gif was made by me in AdobePhotoshop CC2014.

El Gif de Paso a Paso fue realizado por mi en AdobePhotoshop CC2014.


The image of HIVE used on the cover (initial image) was taken from here:

La imagen de HIVE usada en la portada (imagen inicial) fue tomada de acá:


Source--Fuente

My social networks-Mis redes sociales

Sort:  

Bueno ¡Mcgiver te debe estar reverenciando! La verdad que fue una solución para tu cuello, lo que me causa curiosidad es si el motor hace que la bolita del roll-on da vueltas por sí misma con las revoluciones del motor ¿es así? Gracias por brindar soluciones en estos tiempos de pelazón..! Saludos..!

Firma Fermionico 3.png

Saludos @fermionico! Jajajajaj Gracias por lo de Mcgiver (realmente me hiciste reír XD ) . Si, realmente es interesante lo que se puede hacer con 0$ y es correcto! la fuerza del motor al girar, hace que la pelota gire sola, pero cuando te lo pasas por la piel solo se mueve el roll-on en función de la dirección que lo lleves (así evita maltratos a la piel) y la vibración que giraba la pelota ahora se transmite directo a tu musculo  . Te dejo un video que acabo de subir para que lo compruebes. Además tomando en cuenta tu valioso comentario, edite la publicación y anexe el video en la presentación final de la manualidad.

Congratulations @shirahoshi! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s) :

You published more than 100 posts. Your next target is to reach 150 posts.

You can view your badges on your board And compare to others on the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Do not miss the last post from @hivebuzz:

Hive Power Up Day - Let's grow together!
The HiveBuzz Shop - New Items and Designs

Es impresionante lo que logra construir usted en sus momentos de ocio ¡gran aporte, gracias por compartirlo!

Gracias amiga! me alaga tu comentario.

sera un vibrador para que te lo meta en el culo