Ironing or pressing to enhance the beauty of a garment made mechanically Folding and packing etc. is done, it is called finishing. In some cases before finishing. The clothes are washed. Folding is done after ironing or pressing. Clothing. Folding is the process of folding it to a certain size after ironing. Determined by the buyer, ) Is supplied. স Paeshak funding is done in size or standard size.
Types of folding on the types of clothing Depends. There are basically four types of shirt folding, such as (a) Stand up folding and folding with 4 collar body at 90 ° angle. (B) Semi-stand up folding: At 45 ° angle when folded with collar body. , (C) Flat pack folding: The collar is completely laid on the body of the shirt. 1. (D) Hanger pack folding and packing the shirt hanging in the hanger. At the end of the folding of the garment, it has to be put in a polythene packet. Polythene packets are usually of prescribed size Happens. Care should be taken while packing so that the packet does not tear or unwanted folds in the garment. Fall. In particular, you need to make sure that the size sticker is in place properly. Read When the polythene packet is finished, it has to be sorted according to the size and color and kept in the designated rack. Sorting to be black Packed in the inner box according to size and color. Packed in the inner box as per work order. Work Packing in the inner box according to the work order is called assortment. Defined in Inner Boxes Packing by inserting a number into a carton is called packing or packing. With scotch tape well over the carton Sealed,
is printed on the carton, such as the carton box number, the size of the carton box, Shipping mark, destination, etc. 6.2 Necessities of thread cutting 6 After the garment is sewn at the ready-made factory to check whether the sewing is correct or the garment is sent to the inspection department to see if there are any defects. After sewing without it, It is also important to see if the sewing thread is properly cut. The edges of the sewing thread do not cut properly If it hangs on the surface of the garment. Thus the beauty of the garment is greatly diminished if the ends of the yarn are hung Gets. Especially if the thread of the export quality of the garment is out. Close acceptability decreases. That is why the unwanted yarn has to be cut before sending it to the finishing department. Again the ends of the yarn have to be cut in such a way that it does not come off the garment. Thread cutting machine or scissors The loose yarn is cut by scissors. Therefore, thread cutting is vital for good quality clothing.