Beautiful bracelet with flat knot and beads with lattice design

in Jewelry29 days ago

rejas (1).jpeg


Greetings #jewelry community, wishing you a happy and blessed Sunday to this wonderful community of creative crafters. Today I am happy to share with you my new creative project. It is a beautiful, delicate, attractive and very eye catching bracelet with beautiful Czech crystals and beads with beautiful lattice style design.
It is a very simple jewel to make but the final result is amazing, very beautiful and feminine. This bracelet is very easy to make and in just a few minutes we have it done. It is very attractive and I loved the final result.
God bless you and I hope you like my creation.


Saludos comunidad #jewelry, deseándoles feliz y bendecido domingo a esta maravillosa comunidad de artesanos creativos. El día de hoy me siento feliz de compartir con ustedes mi nuevo proyecto creativo. Se trata de una hermosa, delicada, atractiva y muy llamativa pulsera con hermosos cristales checos y mostacillas con hermoso diseño estilo rejas.
Es una joya muy sencilla de elaborar pero el resultado final es increíble, muy hermosa y femenina. Ésta pulsera es muy fácil de hacer y en tan solo pocos minutos ya la tenemos hecha. Es muy atractiva y me encantó el resultado final.
Que Dios les bendiga y espero les guste mi creación.

WhatsApp Image 2024-04-07 at 17.05.59.jpeg



MATERIALS
The materials we will use to make this beautiful bracelet are:
Chinese thread
Scissors
Tinder
Measuring tape
Adhesive tape
Czech crystals
Beads

MATERIALES
Los materiales que utilizaremos para realizar esta hermosa pulsera son:
Hilo chino
Tijera
Yesquero
Cinta métrica
Cinta Adhesiva
Cristales checos
Mostacillas

rejas (13).jpeg


PREPARATION
To start this delicate bracelet we will cut two 35cm strands that we will use as a base to insert the Czech crystals and beads.

PREPARACIÓN
Para comenzar esta delicada pulsera vamos a cortar dos hebras de 35cm que usaremos como base para introducir los cristales checos y las mostacillas

rejas (12).jpeg


Then I cut a 120 cm strand of Chinese thread that I will use to weave the flat weave and also to insert the beads.

Luego corté una hebra de hilo chino de 120 cm que usaré para realizar el tejido plano y también para introducir las mostacillas

rejas (11).jpeg


We start our flat weaving as follows: First we take the base yarn and measure 7cm from the top downwards and fasten with a strap, from that distance we start weaving.
Comenzamos nuestro tejido plano de la siguiente forma: Primero tomamos el hilo base y medimos 7cm de la parte superior hacia abajo y sujetamos con un tirro, a partir de esa distancia comenzamos a tejer

rejas (10).jpeg


Then we pass the 120cm yarn under the base yarns and make a simple knot, the yarn must match at the ends. Then we pass the thread on the right side over the base threads in the form of a P. Then we pass the thread on the left side over the right thread that is on the left side and pass it under the base threads and pull it through the inside or ring of the same as shown in the image in step three, then we press and tie the knot.
Luego el hilo de 120cm lo pasamos por debajo de los hilos base y hacemos un nudo sencillo, el hilo debe coincidir por las puntas. Después pasamos el hilo del lado derecho por encima de los hilos base en forma de P. Después pasamos el hilo del lado izquierdo por arriba del hilo derecho que se encuentra en el lado izquierdo y lo pasamos por debajo de los hilos base y lo sacamos por el interior o argolla del mismo como se muestra en la imagen en el paso tres , después presionamos y hacemos el nudo

rejas (9).jpeg


After this step, now, we pass the thread on the left side above the base threads and form a kind of four, then we pass the thread on the right side above the left thread that is on the right side, then we pass it under the base threads and take it out through the inside of the ring on the left side, then pressed so that we have a knot as shown in the image.
Después de realizar ese paso, ahora, pasamos el hilo del lado izquierdo por arriba de los hilos base y formamos una especie de cuatro, luego pasamos el hilo del lado derecho por encima del hilo izquierdo que se encuentra en el lado derecho , después lo pasamos por debajo de los hilos base y lo sacamos por el interior de la argolla del lado izquierdo, después presionados para que nos quede un nudo como se nos muestra en la imagen

rejas (8).jpeg


After making a complete flat knot we separate the threads, join the base thread on the left with the thread on the left and the thread on the right to the right side. Then we start placing a bead on the left side and a bead on the two threads on the right side.
Después de realizar un nudo plano completo separamos los hilos, unimos el hilo base de la izquierda con el hilo de la izquierda y el de la derecha hacia el lado derecho. Luego comenzamos a colocar una mostacilla del lado izquierdo y una mostacilla en los dos hilos del lado derecho

rejas (7).jpeg


Then we separate the yarns and take the base yarns and introduce a Czech crystal.
Luego separamos los hilos y tomamos los hilos bases e introducimos un cristal checo

rejas (6).jpeg


Then we tie a complete flat knot
Después realizamos un nudo plano completo

rejas (5).jpeg


Again we separate the threads and place the beads and introduce the Czech crystal and make the complete flat knot.

Nuevamente separamos los hilos y colocamos las mostacillas e introducimos el cristal checo y realizamos el nudo plano completo

rejas (4).jpeg


We continue with the same procedure until we reach the desired size.
Seguimos realizando el mismo procedimiento hasta llegar a la medida deseada

rejas (3).jpeg


Once the weaving was finished at the desired distance, I cut the excess threads with a scissors and sealed them with a plasterboard.

Finally, we tie a flat knot to make the bracelet's locking ring. We cut the excess threads and seal

Una vez terminado el tejido a la distancia deseada con una tijera corté los hilos sobrante y con un yesquero sellé
Finalmente realizamos un nudo plano para hacer el trancadero de la pulsera. Cortamos los hilos sobrante y sellamos

rejas (2).jpeg


This is the result of our beautiful bracelet
Así quedó nuestra hermosa pulsera

WhatsApp Image 2024-04-07 at 17.05.59.jpeg


Translated with https://www.deepl.com/translator
     Todas las imágenes son de mi autoría

      All the images are of my authorship
Sort:  

Congratulations @evelin71! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)

You received more than 7000 upvotes.
Your next target is to reach 8000 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Check out our last posts:

Feedback from the April Hive Power Up Day
Hive Power Up Month Challenge - March 2024 Winners List
Be ready for the May edition of the Hive Power Up Month!

This creative bracelet is really eye catching and made it look more colorful with the help of the weaving. Everything went well especially the positioning of the beads.

Greetings @apunawu thank you very much for your visit and comment.