Hola a todos..
Estamos muy cerca de celebrar el día del amor y la amistad 😍 un día para compartir con nuestro amor o amigos un detalle especial.
Todos tenemos entre estos amores o amigos una especial personita que toma café, té o chocolate caliente ☕ por lo cual se hace propicio regalar una taza para que disfrute de alguna de estas bebidas calientes 🫖☕🥰.
Por ello pensando en este detalle esta oportunidad les traigo una caja porta taza osito cupido ❤️ fácil, hermosa y económica de elaborar, así que quédate conmigo hasta el final y disfruta del procesó.
Hello everyone...
We are very close to celebrate the day of love and friendship 😍 a day to share with our love or friends a special detail.
We all have among these loves or friends a special person who drinks coffee, tea or hot chocolate ☕ so it is appropriate to give a cup to enjoy one of these hot drinks 🫖☕🥰.
So thinking about this detail this opportunity I bring you a cup holder box osito cupido ❤️ easy, beautiful and economical to elaborate, so stay with me until the end and enjoy the process.
Cómo en cada una de mis creaciones los materiales son fáciles de conseguir y de seguro tienes la mayoria en casa.
>#### Materiales
1 cartón
1 taza para café
1 foami negro escarchado
1 foami rojo escarchado
1 foami dorado
1 foami blanco escarchado
1 foami color piel
1 palillo fino de madera
1 silicón liquido
1 perforador
1 pliego de papel seda rojo
1 tijera
1 regla
As in each of my creations, the materials are easy to get and for sure you have most of them at home.
#### Materials
1 cardboard
1 coffee cup
1 black frosted foami
1 frosted red foami
1 gold foami
1 white frosted foami
1 skin-colored foami
1 thin wooden stick
1 liquid silicone
1 hole punch
1 sheet of red tissue paper
1 scissors
1 ruler
Elaboración de la caja
❤️ Toma el cartón y traza un trozo de 55cm de largo por 14cm de ancho en unos de sus extremos dibuja la forma de un corazón.
Making the box
❤️ Take the cardboard and draw a piece of 55cm long by 14cm wide on one of its ends in the shape of a heart.
❤️ Recorta y debajo de este marca un cuadrado de 11cm de largo por 10cm de ancho, recorta, como lo muestra la fotografía.
❤️ Cut out and underneath it mark a square 11cm long by 10cm wide, cut out, as shown in the picture.
❤️ Marca y recorta un cuadrado del otro lado del cartón con las mismas medidas de 10cm de ancho por 11cm de largo.
❤️ Mark and cut out a square on the other side of the cardboard with the same measurements of 10cm wide by 11cm long.
Decoración
❤️ Traza y recorta un liston de foami rojo de 30cm de largo por 1cm de ancho y pega al borde del corazón.
Decoration
❤️ Trace and cut a red foami ribbon 30cm long by 1cm wide and glue to the edge of the heart.
❤️ Recorta otro listón de foami rojo escarchado con las mismas medidas que el anterior y pega al cuadrado debajo del corazón.
❤️ Cut another frosted red foami ribbon with the same measurements as the previous one and glue it to the square under the heart.
❤️ Toma el sobrante del listón y pegalo en el cuadrado del otro lado de la caja junto con dos corazones pequeños dorados para decorar.
❤️ Take the excess ribbon and glue it to the square on the other side of the box along with two small gold hearts for decoration.
❤️ Elabora en papel el molde del osito cupido tal como muestra la fotografía y transfiere al foami de color marrón.
❤️ Make the cupid bear mold on paper as shown in the picture and transfer it to the brown foami.
❤️ Recorta y reserva.
❤️ Cut out and set aside.
❤️ Traza el ocico de color piel y medio semicírculo para las orejas.
❤️ Trace the skin-colored ear and half a semicircle for the ears.
❤️ Utiliza un creyon anaranjado para darle sombra a los bordes.
❤️ Use an orange creyon to shade the edges.
❤️ Para la nariz recorta un óvalo pequeño de foami negro.
❤️ For the nose cut out a small oval of black foami.
❤️ Para los ojos perfora el foami negro con ayuda del perforador.
❤️ For the eyes, punch out the black foami with a hole puncher.
❤️ Transfiere los moldes al foami blanco la ala y el pañal del osito cupido y recorta.
❤️ Transfer the cupid bear's wing and diaper to the white foami molds and cut out.
❤️ Una vez lista cada pieza aplica silicón y arma el osito cupido.
❤️ Once each piece is ready, apply silicone and assemble the cupid bear.
❤️ Una vez armado el osito reservamos.
❤️ Once the teddy bear is assembled, set aside.
❤️ Toma el foami dorado y traza el molde el arco y recorta.
❤️ Take the gold foami and trace the arch mold and cut out.
❤️ Para la flecha recorta un corazón pequeño de foami rojo y una punta de color dorado y pega al palillo fino de madera.
❤️ For the arrow, cut out a small red foami heart and a gold-colored tip and glue it to the thin wooden stick.
❤️ Una vez listo el arco y la flecha pegamos al osito cupido.
❤️ Once the bow and arrow are ready, we glue the cupid bear.
❤️ Toma el osito y pegalo a un lado de la parte delantera de la caja como muestra la fotografía.
❤️ Take the teddy bear and glue it to the side of the front of the box as shown in the picture.
❤️ Traza el molde de love al foami rojo recorta y colócalo sobre una base de foami dorado y pega a un extremo de la caja para decorar.
❤️ Trace the love mold onto the red foami, cut it out and place it on a gold foami base and glue it to one end of the box to decorate.
❤️ Recorta unos corazones pequeños dorados y rojos para terminar de decorar la caja.
❤️ Cut out small gold and red hearts to finish decorating the box.
❤️ Corta tiras finas y gruesas de papel de seda rojo para rellenar la taza.
❤️ Cut thin, thick strips of red tissue paper to fill the cup.
❤️ Rellenamos la taza con el detalle de tu preferencia y terminamos para obtener este hermoso resultado.
❤️ Fill the cup with the detail of your choice and finish to obtain this beautiful result.
Cómo ven crear es muy fácil y esto ayuda hacer más fácil al momento de regalar sobre todo cuando no contamos con un presupuesto amplio.
As you can see, creating is very easy and this helps to make gift giving easier, especially when we do not have a large budget.
Así que si te gusta crear pensando en esa personita especial animate y no dejes de compartir tu creación ☕❤️.
So if you like to create with that special person in mind, come on and share your creation ☕❤️.
Porta taza osito cupido ☕❤️
Cupid bear cup holder ☕❤️
Thanks for visiting.
Fotografía principal edición con Canva.
Fotografías tomadas con mi teléfono Samsung A10 no autorizó su uso.
Main photo editing with Canva.
Photos taken with my Samsung A10 phone not authorized for use.
Congratulations @cirangela! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)
Your next target is to reach 30000 upvotes.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOP
Check out our last posts:
Support the HiveBuzz project. Vote for our proposal!
Thank you for sharing this post in the DIYHUB Community!
Your content got selected by our fellow curator semarekha & you just received a little thank you upvote from us for your great work! Your post will be featured in one of our recurring compilations which are aiming to offer you a stage to widen your audience within the DIY scene of Hive. Stay creative & HIVE ON!
Please vote for our hive witness <3
Greetings from DIYHub. Thanks for your support and sharing with us your DIY projects. We are coming up with a new series where we would like to interview our fellow members. You are one of the fellow members in the list. If you accept our interview invitation, please kindly drop us a message in our Discord. We will get in touch with you there.
Hello, yes I would like to contact you by Discord