Greetings hivers and happy Sunday to you all, it's really been a while here, but it for good and I'm happy to be back here, so I will be sharing with you how I made this simple bubu gown.
All that you needed to make this is your fabric, zip, lining, aiming gum, tape, chalk, scissor,asoke, and tread.
Now first thing to do is to measure out your full length from the fabric and place it, and give out an inch allowance for zip for the back, measure out sixteen inches from the top down and measure out the shape and cut it out.
After cutting it out, you cut out your lining for it, and and ur asoke.
Now you proceed to fixed your lining for the back, after that you iron it.
Now for the front, before putting the lining, you first fixed the asoke at the front and iron it to sleep flat by placing your aiming gum inside, then fixed the lining.
After that, before fixing the lining at the hand side , you have to join the shoulder part together then you fix the asoke from the front to the back, and give it a good pressing using your iron.
Now after fixing it at the hand then you proceed to fixed everything together and then fixed your zip, and your bubu gown is ready to wear.
Thank you for stopping by
The bubu gown came out nice. It would be nice also if I see a bit more description of your process. Well done
selected by @stevenson7
Thank you so much, I'll give more illustration next time