lcrypt cross-posted this post in Discovery-it 2 years ago


CHECK IT OUT!!! AN IOT CROP MANAGEMENT AND IRRIGATION SYSTEM REMOTELY MONITORED AND CONTROLLED WITH A SMART PHONE DEVELOPED FROM SCRATCH

in STEMGeeks2 years ago

hive posters.png

The problem with crop monitoring and irrigation is that it is time-consuming and not very accurate. Crop irrigation is not just about watering the plants, but also about maintaining the right moisture level in the soil. Irrigation systems are usually controlled by humans who have to manually turn on and off valves, which can lead to a lot of wasted water.

The development of a smart IoT enable crop monitoring and irrigation system will help solve this problem. The system will be able to monitor plant growth, detect if there's a risk of drought or if the soil has too much water, and automatically irrigate accordingly.

This system can be used by farmers to help them with their crops in an easier way than before, as it will eliminate human error from the equation.

I'm @techlhab and today, I would like to share with you guys one of my recent IoT/Embedded Systems projects which is an IoT crop management and irrigation system I developed using a microcontroller, sensors, relays, etc, and programmed using C++ with Arduino IDE (Integrated Development Environment).

This system is designed to monitor and control the irrigation of a crop with the aim to reduce water usage and increase yield. It consists of sensors, actuators, a microcontroller, and a wireless network that are installed in the system.

The sensors measure moisture content, and soil conductivity. The camera installed in the system helps provide a live stream of the crop or field. The relay controls the irrigation pump according to the sensor readings. The microcontroller collects data from all sensors and uploads them to a server for analysis. The wireless communication between the different components enables remote monitoring of crops from anywhere in the world via an internet connection.

It is a very nice and interesting project and it makes it easy to manage, monitor, and control crops and makes the whole crop management and irrigation process much more easier and efficient.

An application is developed with the system to help easier monitor and control the crops via the internet. This means you can be anywhere in the world and still be able to know the condition of the crop as well as irrigate it properly.

The system has a camera incorporated in it to easily monitor the live appearance of the crop, check for pigmentation and also monitor its surroundings.


HARDWARE COMPONENTS


  • ESP 32 CAM Micro Controller
  • Soil Moisture Sensor
  • Relay Module
  • 5v DC Water Pump
  • LED
  • Control Switch
  • Water Hose
  • Vero Board
  • 3.7V Rechargeable Lithium Battery
  • Lithium Battery Charger Module
  • Resistor
  • Connecting Wires

WhatsApp Image 2022-09-14 at 8.18.14 AM (1).jpeg

Relay

WhatsApp Image 2022-09-14 at 8.18.14 AM.jpeg

3.7v Rechargeable Lithium Battery

WhatsApp Image 2022-09-14 at 8.18.15 AM.jpeg

Lithium Battery Charger Module


WhatsApp Image 2022-09-14 at 8.18.16 AM.jpeg

Vero Board

WhatsApp Image 2022-09-14 at 8.18.17 AM (1).jpeg

WhatsApp Image 2022-09-14 at 8.18.18 AM.jpeg

ESP 32 CAM Micro Controller

WhatsApp Image 2022-09-14 at 8.18.17 AM.jpeg

Soil Moisture Sensor

WhatsApp Image 2022-09-14 at 8.19.39 AM.jpeg

Female Header Connector

WhatsApp Image 2022-09-14 at 8.20.04 AM.jpeg

Resistors


SOFTWARE COMPONENTS


  • Arduino IDE (Integrated Development Environment)
  • Embedded C/C++
  • Fritzing

THE HARDWARE CONNECTIONS


  • Connecting the Soil Moisture Sensor to the Esp 32 Cam
ESP 32 CAMSoil Moisture Sensor
15vVcc
2GndGnd
3D2Signal
  • Connecting the Relay Module to the Esp 32 Cam
Arduino UnoRelay Module
15vVcc
2GndGnd
3D10Signal

THE WIRING DIAGRAM


wiring diagram.jpeg


PICTURES


WhatsApp Image 2022-09-19 at 5.10.25 PM.jpeg

WhatsApp Image 2022-09-19 at 8.43.28 AM.jpeg

iot irrigation system.jpeg

Thanks for reading and visiting my blog 🤝. Kindly support this post by reblogging, upvoting, and commenting, it would be highly appreciated.

Images used in this post were all designed by me using frizting, a circuit design and simulation software, and canva.

Posted with STEMGeeks