Following on from my last post in which I described a Universal connection with a stranger in Italy who is constructing what I personally believe to be the most authentic and unique devices available in the world of electroculture (Shardana Geometries), I would like now to describe for you in what ways my new Italian friend has influenced my current direction, focusing in particular on the work of Slim Spurling and Tensor rings which have completely changed the game for me.
Once you know how to make a tensor ring you can make a bunch more and create the Seed of Life, like the one I have made here.
Since making this Seed of Life many ideas have come to me (should I be surprised?) and I am excited now to show you in what way I have upgraded my original Eeman circuit.
So let's get started...
Healing jewellery
Before I began chatting with Brombo of Shardana Geometries I was making bracelets based on some images I saw of bronze age 'jewellery'. I put this word in inverted commas because it seems to me these items were made to create healing frequencies, rather than just look pretty, so should not be labelled in a way which makes us think only of aesthetics.
In the modern world they are called Lakovsky coils, open circuit copper bracelets. Known to be good for human and plant health. Even bees will benefit from having them on their hives, producing more honey than normal. In addition, these bracelets are made from twisted copper wire in the style of a tensor ring which I will describe in more detail later.
I made my first round of bracelets instinctively before looking at the bronze age stuff.
These three are all holding quartz from the same geode.
My intention here is to wear one of them and send the other two to my mother and her partner. In this way we will all be connected by the same quartz geode and I will more effectively be able to send them Reiki/healing energies.
Then I saw the bronze age stuff and produced these.
My confidence grew with each one and I feel now as if I could make any number of spirals at the end of these.
Let me know your thoughts on these bracelets please. Is this the kind of frequency healing tool you could see yourself wearing?
Living Metals
It is true to say that both the copper and the zinc I have used here will change colour over time. I went swimming in the sea a few days ago after which I lay down in the sun and I noticed how the thin silver zinc wire turned brown immediately.
The copper itself will get darker and less shiny as it reacts to the environment around it. But that's okay! As explained by my new Italian friend, this shows us how copper is a living metal which is able to capture information through its appearance.
Worldcoppersmith.com put it like this:
The shades of patina that form on the surface of a copper furnishing can store the memories of meals, spills, new homes and life changes over the course of centuries.
They also share the following images which I found quite helpful.
It had not occurred to me until this moment why the Statue of Liberty or indeed the roofs of many great buildings are green.
Salty sea air will increase the speed of the process.
And so, the appearance of our creations will change over time, but that my friends is exactly how it is supposed to be.
Observe the changes without judgement and learn from them.
Slim Spurling & the Cubit
Spurling appears to be yet another incredible man to add to the ever-growing list of great people we are not taught about in school.
After a twenty-year career as a blacksmith during which he founded and directed the largest blacksmithing school in the USA, in the 1970s he began dowsing and created a very simple and inexpensive method of neutralizing Geopathic Stress and the Hartmann Grid.
Not all that long ago I identified with my dowsing rods a dangerous vortex in Sabrina's mother's home which from my perspective is 100% responsible for her cancer so I am excited to learn more about Spurling's methods and put them to immediate use.
Slim by name, slim by nature.
The following passage is taken from his official website biog:
In 1985 he and his good friend Bill Reid began to explore the intricacies of alchemy and metaphysics. The research in subtle energy phenomena and technologies lead to the discovery of the first Light-Life® Ring in 1991.
In later years Spurling created the Acu-Vac Coil, the Feedback Loop, and the Harmonizer.
These Light-Life Tools, which are room temperature super-conductors, produce positive subtle energy effects in areas as diverse as relieving discomfort, enhancing the body’s ability to heal itself, improving water quality, abating air pollution, certain types of insect control, and increased plant growth. source
Tensor rings
The Light-Life® Ring mentioned above is a tensor ring and it can be made in various different sizes.
Tensor rings get their special energy through to a few different factors:
- The total length of the wire (not the diameter of the circle) is measured in cubits and therefore creates a beneficial healing frequency.
- Two copper wires twisted tightly together (using a clockwise action) facilitates the movement of energy which becomes a continuous loop when connected as a circle.
- Copper can capture the desires of the creator and this is particularly true when the wires are twisted with clear focused intention, so this device provides a unique opportunity to encode purpose as the Co-Creators we are.
Sacred, Lost & Empowerment cubits
While there are apparently 19 different cubit measurements for which attributes are known only for ten of them, the three main cubit lengths being used to make tensor rings these days seem to be as follows:
Sacred Cubit
- The Sacred (or Royal) Cubit is 52.4 cm, creating a frequency of 144mhz.
This unit of measurement is nothing new to us as it was used to build the great pyramids in Egypt but until Slim Spurling came along we had apparently forgotten that if one creates anything at all using units of this length, it has a magical effect on the environment around it. Goodness knows how different life would be today if all our modern homes had been built with this in mind.
The exact length of a Sacred Cubit was discovered carved into the stone above the entrance doorway in the King’s Chamber of the Great Pyramid at Giza. source
Lost Cubit
- The Lost Cubit is 59.67cm, creating a frequency of 177mhz.
It was discover by Spurling & Hans Becker, named the lost cubit because it appeared to have been intentionally left out of most ancient records.
Science has only recently found our conscious emotional thoughts can have effects upon our DNA. Did the Lost Cubit length get “lost” on purpose because it carries frequencies which help bridge the gap between thought and manifestation? source
Empowerment Cubit
- The Empowerment Cubit is 73.3 cm, creating a frequency of 188mhz.
The Empowerment Cubit has been said to decalcify the pineal and release unhealthy belief programs which do not serve our higher-self or our innate abilities. It also serves to allow more and clearer communication with our intuitive self. source
The length for the Empowerment cubit was given to Spurling (I assume through his dowsing skills) shortly before he died in 2007.
Applying this knowledge to my work
Having now learned about the importance of maintaining very precise cubit lengths when working with pieces of copper wire I am applying this knowledge to both current and past creations.
It isn't hard because all my creations start as a straight line which can be cut and filed down very precisely to achieve desired length before bending the copper into its final position.
This double spiral antenna is exactly 3 lost cubits and with its intention-twisted wires tailored specifically to plant health I feel sure it will be more effective than all my previous designs.
I have started making 1/4 sacred cubit pendants which hold quartz from that same geode I mentioned earlier. The copper around the quartz spirals clockwise from bottom to carry the energy of the quartz up to the user and ideally the pendant is worn with a metal chain to continue the flow of energy up to the neck area/throat chakra.
Absolutely everything I make from now on will conform exactly to one of the cubits, depending on requirements.
If you are a creator yourself (which we all are really) I recommend you look into this subject and, if you feel it, adopt the cubit system to give your products enhanced qualities. Even the most banal objects (a light stand or a pen for example) can double as healing tools if they have been created with cubits in mind.
Eeman Circuit upgrade
I have been wanting to send an Eeman circuit to my mother in the UK but realised that my current design is far too complicated and liable to get all twisted up in the boxing/unboxing process.
As is my way I didn't think too much on this subject knowing the answer would come along in its own good time.
Thanks to Brombo's influence, last week I made two sacred cubit tensor rings and new coils for the circuit which fit neatly inside the rings.
This new design permits for it all to be packed away in a small circular space by folding the two spirals inward.
In place of Wands of Horus I am using quartz from that same geode for the handles.
A right handed user would position the coils on the bed like this with the upper coil under a pillow for the head. Lower coil under base of spine.
This is my sacred cubit Seed of Life, made with one full sacred cubit and seven 1/2 sacred cubits. Infused intentions relevant to physical healing and functionality in tune with the circuit.
My idea was to use it in conjunction with the circuit, either resting it on our body during the session or on the spiral itself under our pillow.
Needless to say I have tried this new circuit and found it to be more effective than my previous, despite the lack of Horus Wands.
Quick overview of tensor ring construction process
I will go into this subject in more detail in my next post but would like to mention a few points here.
Firstly, the copper wire has been twisted using a power drill.
During the twisting process, which takes a few minutes, I infuse the intentions.
The two ends of the twisted copper are held together with a second piece of copper (which is exactly 1/8 sacred cubit in length).
Interestingly, a full sacred cubit tensor ring seems to fit almost exactly the circular span of our hand.
Making it a very logical choice for humans as a unit of measurement common to one and all.
All of the different tensor rings were connected together with thin copper wire to make my Seed of Life.
In my next post I will give you step by step DIY instructions for creating low budget tensor rings along with a guided meditation I recommend you do which is said to connect us with Slim himself for the optimal Co-Creation of these devices.
Final Thoughts
The new chapter I refer to in the title of this post relates not so much to cubits & tensor rings but the unfamiliar road which sits before me now. Welding.
Specifically gas welding. All of the things I intend to make this winter will need more than a few rolls of copper wire to hold them together and the bottom line is that a product is going to last longer if it is welded.
However, from what I can tell it is a difficult art (perhaps due to the dark eye protection which must be worn?) and one can easily end up with something which looks worse rather than better. It can't possibly be any harder than getting my drone pilot's licence a few years back. Looking forward to finding out.
Am grateful to Brombo for his kind assistance in helping me learn what I need as a first time welder and grateful too for a wonderful friend in my home village who is exchanging money with me for future products I am yet to build for her, in order that I can buy what I need and get started right away.
Love how it all just clicks together when you are on the right path.
In the next few days I will have an Oxy-turbo set 200 kit which uses oxygen in the mix to increase the temperature up to a max of 3100°C.
With this I also need a suitable outdoor workspace complete with clamps and fire bricks to protect the desk and wall behind it.
Today I bought the desk and 200m of 2.5mm copper wire.
Along with some copper tubing in order that I can start practicing my welding by creating pyramids, which I imagine must be extremely complicated at the apex.
Brombo posted a picture recently in his telegram group which shows the level of attention required to produce a quality pyramid.
Dettagli means details. But what we are really looking at here is skill. It must take a lot of practice to reach this level and I feel blessed to have him setting high standards for me to aim for.
Sabrina's skill with a needle and thread has been consistently improving for many years now, almost as if the Universe had something in mind for this upcoming period of my life, so today she whipped up the first prototype bag for the Eeman circuit.
She still needs to make the individual backs for each of the spirals and I am excited to see how it will look. These backs will be easily removable to account for left handed users who will need to turn the circuit upside-down.
Here we have the first prototype travel bag!
Reminds me of a UFO. Ready to take its owner anywhere they want to go...
Beyond all of this I can see clearly now the mechanism through which we will gift these products to the world in a way that benefits both parties. Am grateful for friends like @clareartista who is guiding me on this important journey which seeks to recognise & uphold our innate rights as humans.
A website will be built and a name & logo will be found to represent what we my family & I are doing here.
Crystals are being ordered so that the children may continue making the mini orgonites (which were the only popular item at our village market) and there is a buzz of excitement around the house, all of us busy thinking about what we can do to be a part of this exciting new energy which grows exponentially by the day.
While the cats just sleep like normal.
On this occasion receiving the benefits of our recent exploits ;)
Right. I have cider to make, from apples which would normally go to waste due to crazy agricultural practices here which make no sense except for people like me who are willing to pick them up off the floor and do something with them. This year I intend to have 50 litres of cider for the winter and the days of paying money for alcohol are almost behind me!
Love & Light everyone 🌱
Futuristic copper welder image created by myself and the midjourney bot.
Prompts available on request.
You went completely copper! Frankly, doing some beautiful things with your bracelets. All I can suggest is just keep going the way you are and go with your intuition.
I've made several copper bracelets, and one copper torc; all different designs. Funny enough, I did spirals with one bracelet very similar to what you are making, which made laugh when I saw yours. Spirals are an excellent form for your intentions.
Your posts really got me thinking about electroculture again this past summer, so much so I decided to do a repeat test of a very simple copper one I made that I carry when out hiking for hours. I picked a suitable spot to shove it into the ground so it's right beside where I am also in contact with the ground. Approximately 45 min each time. Tried it out three times. I noticed a very big difference in recovery time after six hour hikes, with that as a break somewhere in the middle of said hikes. I thought you might find that interesting. I wonder if you've tried out anything similar?
Many thanks for the encouragement. Keep going I will :)
I feel that. Have been incorporating them into my drawings since I was very young, without understanding why until just recently.
I do find that interesting but I'm not sure I understand what kind of copper device we are talking about?
Recovery time is a useful way to measure effectiveness of devices generally speaking. My earthing sheet does wonders on this front. 5 hours of rest can feel more like 8 hours. Recently I've been sleeping with tensor rings under my pillow and again I feel brilliant in the mornings! So charged and full of energy.
Let me know more details on that device please.
A simple thing I made using a piece of copper ground wire, just under half a cm in diameter, 25 cm in length (roughly). Around that, I wound about 80 cm of copper wire in a spiral, which can be pulled up into the air (3-4 cm) when using. I wanted something mobile with a temporary set up to use to test an idea of mine. Have also added a couple copper braclets at the base, which seems to have a further additonal amplification, based on what I saw with insect behaviour twice.
note, I used the bracelets twice out of the four times I did this.
What a journey. Salty sea air and water (sea, ocean) modifies the appearance of different metals and also wood. Those who have properties and real estate along the coastline can tell you lots of stories about this. An investor told me about the damages done to windows and doors that require you to replace them every 3-4 years. Btw, as a diver I like to use a high quality titanium knife because it's lighter and has higher corrosion resistance than steel. Gosh, there is so much to know about all these elements.
Looking forward to your transformational journey accompanied by all the adventures and people that will cross your path 😉
What a journey indeed. I've not even mentioned yet how (unknown to me) Yannick has been re-posting my electroculture related posts to his followers and one of them contacted me last week to offer me an online healing session known as Beyond Quantum Healing. I jumped at the offer and after getting to know each other for two hours on Monday I will begin a series of three guided mediations with her tomorrow in which I will be guided to the Higher Realms and encouraged to share with her what I see & feel there. The session is recorded (because apparently I may not remember everything I say) and reviewed later. Sounds interesting right? And I love how it came to me. Just when I thought Yannick was too busy for me the Universe reminds me how that doesn't matter.
For the sea water & air I've seen the effects first hand. Have never actually lived by the sea but I've also never been more an hour's drive from it so have spent a fair bit of time observing things there. Last week I noticed a copper statue on the beachfront which had been erected a decade ago yet is was 100% green already. Replace doors and windows every 3-4 years! Wow. Didn't know that and it makes me wonder if humans are perhaps not 'supposed' to build their dwellings so close to this sacred body of water.
Made Esteban's first Magick wand yesterday! From cherry wood.
Wow, that magic wand looks really slick! Let's see what Esteban the wizard will create with it ;)
The story with the quantum healing session sounds phenomenal. Well, I guess this is another confirmation that there are no such things as coincidences. Kudos to Yannick for reposting your articles to his tribe thus getting the word out about electroculture to a wider audience.
Have a gorgeous weekend.
Oh wow Sam, I have bookmarked nearly all of your posts by now. I just love what you are doing, it's so inspiring.
I love the seed of life and the bracelets you have made.
I'm going g to have come back and finish reading this, but like I've said already, I'm so inspired xxxxxx
Great stuff :)
Am pleased it all feels inspiring. Time is of course our biggest obstacle to fun like this but I think when we want something enough the time just seems to appear for us.
Have been working hard on the garden in recent days and enjoying the way everything seems to grow better at this time of year. Believe I have finally mastered coriander and spinach! Both of which we have in abundance now. Still need to build some kind of greenhouse though. Am thinking about a mini earthship... x