Hello everyone, this time I come with a creative process Steampunk style Charms made in different materials which are similar to the Polymer Clay but with a difference and is that these are not baked, well without limiting let's start.
DAS putty is a paste similar to clay, it is dried in the open air and to mold it, only water is needed, it is fast drying and absorbs paint very well.
Flexible dough is a homemade dough based on glue and cornstarch or cornstarch, its drying time varies depending on the size and thickness of the piece, to mold it requires hand cream or glycerin; the pieces stick together with white glue.
This mass is not so easy to handle, since poor handling can create cracks in the piece and sometimes are difficult to cover, you can color before molding with chalk, acrylics and oil; but in my opinion and taste I prefer to work it and then paint it. Once dry this tent tends to reduce its size due to the glue but once dry it is very firm and is difficult to break.
Materials:
º Flexible Mass
º Masilla Das
º White Pega
º Acrylic Paintings
º Hand Cream
º Glycerin
º Brushes
º Water
º Stilettos
º Circular Cutter
º Eyepins and Jump Ring Connectors
º Paso 1
Cut a small piece of DAS Putty, flatten it to a thickness of 3 to 5 millimeters, then with the circular cutters we take out several circles, put the eyepins with your Jump Ring Connectors and let them dry in free air, then anchor them with Black acrylic paint.
º Paso 2
With a file remove the imperfections that may have the circle.
º Paso 3
Take a piece of the Flexible Mass to make the figures, first make a sphere, flatten it in the upper part, while in the lower part press both sides until forming a roundness which is typical of the seashells.
º Paso 4
With a Xacto or Stileto begin to make furrows in the dough to create the texture of the sea shells.
º Paso 5
Add the elements and details that are part of the Steampunk Style with Flexible Mass and White Paste to the whole piece and let it dry.
º Paso 6
To begin with the elaboration of the Seahorse; Make a sphere which you must turn into a cone to create part of the tail, cut from the right side in the form of a half circle to remove the fin and place a strip of flexible dough with one of the ends in the form of the lower part of the body. snail for the tail.
º Paso 7
Add the details of the body with one of the spherical stilettos and attach another sphere on the top to make the head with little detail.
º Paso 8
Once the piece is finished, paste it on the circular base, do the same with the Sea Shell and add the details to the Seahorse relevant to the Steampunk style.
º Paso 9
Once they are firm and stuck to their bases, they proceed to paint both pieces black without leaving blank spaces.
º Paso 10
Apply an acrylic aging to the base that gives it an opaque bronze finish; this applies to both pieces.
º Paso 11
Begin to apply the technique of dry brush which consists of applying the paint with the semi-wet brush to give an old look to the pieces; This is achieved with metallic acrylics.
This is the final result :3
I hope you liked these Steampunk Charms, anything do not hesitate to ask: 3 Bye <3
Esta obra está bajo una Licencia Creative Commons Atribución 4.0 Internacional.
bitcoin wallet: 1PZzDpsbT7VxvnyRHNhnZrcUsZnncmyVq2
Your Post Has Been Featured on @Resteemable!
Feature any Steemit post using resteemit.com!
How It Works:
1. Take Any Steemit URL
2. Erase
https://3. Type
reGet Featured Instantly & Featured Posts are voted every 2.4hrs
Join the Curation Team Here | Vote Resteemable for Witness
Beep bop, this is @pushbot.
I just received a signal from the Mother Ship that you may require a push.
You just got a 11.18% upvote courtesy of @howtoweekly!
Message from the Mother Ship:
You can earn daily profit by delegating SP to make @pushbot stronger. Delegators receive a share in 95% of the earnings.
10 SP • 20 SP • 50 SP
100 SP • 200 SP • 500 SP
1000 SP • 2000 SP • 5000 SP
Any Other Amount
Congratulations! This post has been upvoted from the communal account, @minnowsupport, by Mailein from the Minnow Support Project. It's a witness project run by aggroed, ausbitbank, teamsteem, theprophet0, someguy123, neoxian, followbtcnews, and netuoso. The goal is to help Steemit grow by supporting Minnows. Please find us at the Peace, Abundance, and Liberty Network (PALnet) Discord Channel. It's a completely public and open space to all members of the Steemit community who voluntarily choose to be there.
If you would like to delegate to the Minnow Support Project you can do so by clicking on the following links: 50SP, 100SP, 250SP, 500SP, 1000SP, 5000SP.
Be sure to leave at least 50SP undelegated on your account.
This post has received a 0.31 % upvote from @drotto thanks to: @mailein.
You just received a 4.21% upvote from @honestbot, courtesy of @mailein!
You got a 7.14% upvote from @proffit courtesy of @mailein!
Send at least 0.01 SBD/STEEM to get upvote , Send 1 SBD/STEEM to get upvote + resteem
You got a 16.67% upvote from @voteme courtesy of @mailein! For next round, send minimum 0.01 SBD to bid for upvote.
Do you know, you can also earn daily passive income simply by delegating your Steem Power to voteme by clicking following links: 10SP, 25SP, 50SP, 100SP, 250SP, 500SP, 1000SP, 5000SP.
You've received an upvote from @slothicorn! Click Here to Read our New Curation Policy And Updated Rules
(@justatouchfey) ((.)ω(.))
these are cool. at first glance i thought you'd cast them with metal, good paint job!
Have you had a go with metal clays before? they're very cool. works like clay then when you fire it it becomes metal, silver, and copper i've seen but im sure theres more