Tribute to Karl Lagerfeld - Part 4 - Let's make a sample

[skarnoze]

Step Four:
It's time to make a small sample (100 mm high) to make sure there's no mistake and the design looks good on metal.

I'm using very high quality stainless steel for the engraving so for the sample I re-use previous plate that have been sandblasted to remove the previous testing of failed attempts.

Fails are really a part on the business, this is how you make progress.

Now that the laser machine is programmed and ready to go let's try and see what's the result looks like.

Photo during engraving:

Final result of the sample:

I'm very happy with the result! The only thing I'm going to change is lighten the background, I want Karl Lagerfeld to popup more. I will modify all the 8 shades pour make them lighter for final engraving.

We are almost ready to go :), the artwork size will be 300 mm * 150 mm.

Follow this Project:
➡ Tribute to Karl Lagerfeld - Part 1 - The design
➡ Tribute to Karl Lagerfeld - Part 2 - Create Vectors on Illustrator
➡ Tribute to Karl Lagerfeld - Part 3 - Programming the Laser
➡ Tribute to Karl Lagerfeld - Part 4 - Let's make a sample
➡ Tribute to Karl Lagerfeld - Part 5 - Start the Laser Engraving
➡ Tribute to Karl Lagerfeld - Part 6 - Stunning Result !!!

Thanks a lot for reading,

SkarNoze

—————————————————————————
Follow my Laser Engraving Journey:
➡ https://steemit.com/@skarnoze
➡ https://www.facebook.com/SkarNoze/
➡ https://www.skarnoze.com

Comments

[steemitboard]

Congratulations @skarnoze! You have completed the following achievement on the Steem blockchain and have been rewarded with new badge(s) :

You received more than 2000 upvotes. Your next target is to reach 3000 upvotes.

_{Click here to view your Board
If you no longer want to receive notifications, reply to this comment with the word STOP}

Support SteemitBoard's project! Vote for its witness and get one more award!