PANTY CORTE ALTO CON ENCAJE / PANTY HIGH CUT LACE [ESP -ENG]

¡Hola! linda comunidad de @NeedleWorkMonday el día de hoy traigo otra versión de la panty que publique hace unos días. Es esta hermosa panty con encaje en la parte trasera, y la podemos elaborar con el mismo molde que utilizamos en el post anterior de panty corte alto, pero lo usaremos de manera diferente. Les aseguro que es muy sencilla de elaborar y queda hermosa.

Hello, nice community of @NeedleWorkMonday today I bring another version of the panty that I published a few days ago. It is this beautiful panty with lace in the back, and we can make it with the same mold that we used in the previous post of high cut panty, but we will use it in a different way. I assure you that it is very simple to make and it looks beautiful.


IMG_20220309_143011.jpg


Ahora sí, agarremos nuestras tijeras y comencemos.

Los Materiales a utilizar son los siguientes

Now, let's grab our scissors and get started.

The materials to be used are the following



IMG_20220309_121630.jpg


Molde de la panty / Panty mold

molde talla m.png


PROCEDIMIENTO

Elaboramos nuestro molde en una hoja o lámina de papel y siguiendo las instrucciones y medidas dadas en la foto, se corta y nos debe de quedar así.

PROCEEDING

We make our mold on a sheet or sheet of paper and following the instructions and measurements given in the photo, cut it and it should look like this.


IMG_20220309_122019.jpg


Lo doblamos por el medio de manera que las dos puntas de la entrepierna del molde queden perfectamente unidas y parejas, luego lo aseguras con unos alfileres para que no se mueva.

Fold it in the middle so that the two ends of the crotch of the mold are perfectly joined and even, then secure it with pins so that it does not move.


IMG_20220309_122212.jpg


Luego tomamos nuestra tela de encaje y la doblamos para que nos quede por el revés de la tela (de esta manera nos saldrán dos piezas) y colocamos el molde por el lado más ancho arriba de ella y como se muestra en la figura dejamos que las ondas que trae nuestro encaje queden al borde del molde para no cortarlas ya que estas quedan en el resultado final.
Debemos tener en cuenta, al momento de cortar que se debe dejar 0,5 cm de costura en el lateral derecho de la tela como se muestra en la figura.

Then we take our lace fabric and fold it so that it is on the back side of the fabric (this way we will get two pieces) and we place the mold on the wider side on top of it and as shown in the figure we let the waves that our lace brings remain at the edge of the mold so as not to cut them as these remain in the final result.
We must take into account, at the moment of cutting, that we must leave 0.5 cm of seam on the right side of the fabric as shown in the figure.


panty.jpg

Fuente de edición de la imagen


Y así tendremos estas dos piezas.

And so we will have these two pieces.


IMG_20220309_123030.jpg


Luego tomamos nuestra tela de algodón y colocamos arriba de ella nuestro molde pero esta vez por el lado más pequeño, e igual recortamos por el lateral 0,5 cm de costura. Para que nos queden estas dos piezas.

Then we take our cotton fabric and place our mold on top of it, but this time on the smaller side, and cut 0.5 cm of seam allowance on the side. So that we have these two pieces.


IMG_20220309_123112.jpg


Luego de hacer estos cortes, también cortamos el refuerzo con un pequeño trozo de tela de algodón y nos quedara así.

After making these cuts, we also cut the reinforcement with a small piece of cotton fabric and it will look like this.


IMG_20220309_123212.jpg


Tomamos nuestras dos piezas de encaje y la llevemos a nuestra máquina de coser y con costura tipo zig zig las unimos.

We take our two pieces of lace and take them to our sewing machine and zig zig stitch them together.


IMG_20220309_125648.jpg

IMG_20220309_130529.jpg


Hacemos lo mismo con nuestros cortes de tela de algodón.

We do the same with our cotton fabric cuts.


IMG_20220309_131049.jpg

IMG_20220309_131328.jpg


Ahora vamos a colocar el sesgo en nuestra tela de algodón a ambos lados del contorno de pierna.

Asimismo, uniremos la mitad de nuestro refuerzo tomando en cuenta que quede dentro del sesgo.

Now we are going to place the bias binding on our cotton fabric on both sides of the leg outline.

We will also join half of our gusset, making sure that it is inside the bias.


1.jpg

Fuente de edición de la imagen


Teniendo esto listo tomamos las dos partes de la panty (Encaje y algodón) y se unen por la entrepierna, esto para unir parte trasera y delantera de la panty.

Having this ready we take the two parts of the panty (lace and cotton) and join them at the crotch, this to join the back and front of the panty.


IMG_20220309_133751.jpg

IMG_20220309_134307.jpg


Terminamos de ajustar la otra mitad del refuerzo que no habíamos unido y nos quedará así.

We finish adjusting the other half of the reinforcement that we had not joined and it will look like this.


IMG_20220309_134413.jpg

IMG_20220309_135335.jpg


Continuamos cosiendo un lateral de la panty, para luego unir el encaje de 6 cm en la cintura.

We continue sewing one side of the panty, and then we join the 6 cm lace at the waist.


IMG_20220309_135455.jpg

IMG_20220309_140537.jpg


Tomamos el encaje y lo sobreponemos en la tela 0,5 cm por la parte superior, para que quede bien fijo en la tela y no se vaya a descoser luego. Cerramos el otro costado y ya tendremos nuestra panty lista. (Podemos decorar con un lazo).

We take the lace and overlap it on the fabric by 0.5 cm at the top, so that it is well fixed on the fabric and will not unravel later. Close the other side and we have our panty ready. (We can decorate with a bow).


IMG_20220309_140712.jpg

IMG_20220309_142710.jpg


Así quedaría nuestra hermosa panty, yo la hice en dos presentaciones, la otra en color negro con encaje menos ancho. La talla que elabore para esta panty es M, si desean obtener los moldes para las demás pantys están en mi primer blog de costura.

This is how our beautiful panty would look like, I made it in two presentations, the other one in black with less wide lace. The size I made for this panty is M, if you want to get the molds for the other pantyhose you can find them in my first sewing blog.


IMG_20220309_143011.jpg


IMG_20220309_143123.jpg


Espero se animen a elaborarla, pueden dejarme cualquier duda o inquietud en los comentarios.
Muchas gracias por leer mi publicación.

¡Que tengan lindo día y noche!

I hope you are encouraged to elaborate it, you can leave me any questions or concerns in the comments.
Thank you very much for reading my publication.

Have a nice day and night!


Gracias por leer mi publicación.png

Fuente de edición de la imagen


Fotos tomadas desde mi celular Xiaomi Redmi Note 6 Pro / Photos taken from my Xiaomi Redmi Note 6 Pro cell phone.

Edición de imágenes

Traductor

Sort:  

Has sido votado por

PROYECTO ENLACE

'Conectando Ideas y Comunidades'

PROYECTO ENLACE es un proyecto de curación de habla hispana enfocado en recompensar contenido de calidad y apoyar autores en su proceso de crecimiento en HIVE.

Creemos y apostamos por el futuro de esta gran plataforma, y estamos muy emocionados de poder hacerla crecer junto a esta comunidad. Así que te invitamos a usar nuestra etiqueta ENLACE y estar atento a todas las actividades que tenemos preparadas y que estaremos publicando en breve.

¿QUIERES AUTOMATIZAR TUS GANANCIAS DE CURACIÓN? SE PARTE DEL PROYECTO ENLACE APOYANDO A NUESTRO TRAIL EN HIVE.VOTE INGRESA AQUÍ PARA CONOCER LOS DETALLES.

¿QUIERES INVERTIR ENLACE? DESCUBRE COMO HACERLO Y GENERAR INGRESOS DE FORMA SEMANAL MEDIANTE TU DELEGACIÓN DE HP AQUÍ TE EXPLICAMOS COMO.

Te invitamos a participar en nuestro servidor de Discord: https://discord.gg/3S9y7BbWfS

Atentamente

EQUIPO ENLACE 2021

Guao amiga esto si te ha quedado hermoso... me encanta mucho ver proyectos de este tipo, la panty negra me encanto muchisimo... Felicitaciones por tu hermosa creatividad.

Congratulations @gabimramirez! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s):

You received more than 1500 upvotes.
Your next target is to reach 1750 upvotes.
You got more than 50 replies.
Your next target is to reach 100 replies.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Check out the last post from @hivebuzz:

Feedback from the March 1st Hive Power Up Day
Our Hive Power Delegations to the February PUM Winners
Support the HiveBuzz project. Vote for our proposal!


The rewards earned on this comment will go directly to the person sharing the post on Twitter as long as they are registered with @poshtoken. Sign up at https://hiveposh.com.

Whao esto esta super trabajado!!!

Hola, muchas gracias

 2 years ago  

Hola @gabimramirez, ambos modelos de panty me parecen hermosos. Particularmente me encantan las prendas de encaje y estos dos modelos me gustaron mucho.

(Te sugiero que utilices un fondo de color solido, sin nigún estampado al momento de tomar las fotos de los materiales y de tu proceso creativo para que se puedan apreciar mejor.)
Spanish:


Text Dividers (2).png

NeedleWorkMonday Official Discord

Hola, muchas gracias por tu comentario lo tomare muy en cuenta para mis próximas publicaciones.

Hermoso trabajo, gracias por compartir

Gracias a ti linda por leer y comentar mi publicación

Nice pairs so beautiful thanks for sharing

This is nice🙂

Excelente trabajo @gabimramirez, me gustó mucho tu post y tu forma de presentarlo.