After patching up some smaller rust spots I moved to the passenger side. From far it looks ok but the floor and sills have been bashed in to the point where the metal actually tore and the spots welds were broken.
I tried straitening the edge for the outer and inner sill together and made some progress but ultimately I had to trim the lower part off the inner sill so that I could pull out the deeper dents from the outer sill. To make life easier I cut the most rusted parts of the floor out.
Thankfully there is less to cut out than on the drivers side but there is still much work to be done!
#cortina #rustrepair #fordcortina #cortinabakkie #fordp100 #restoration #cortinaldv
