🧶Bienvenido al mundo del DIY conmigo,un placer saludarles ☺️✨🎨. | 🧶Welcome to the world of DIY with me, a pleasure to greet you ☺️✨🎨.
Good evening friends, it's a pleasure for me to be back with my crafts that although simple will make your life easier in a way, I hope you make yourself comfortable because the tutorial that I bring you today is basically about a nice photo frame that you can make yourself to give to your family and loved ones, the best thing is that you don't need a big budget to be able to do it, just have some cardboard and cardboard on hand to do it, this type of frame helps us to place those beautiful photographs that we want to remember with our family and those we love, if you like the idea of making a recycled painting or frame you came to the right tutorial because here I will be teaching you how to do it in a few simple and easy steps.
Here I'll be leaving you the materials I used for the work and process of our frame. I hope you like how it turns out and we'll get started with this tutorial.
Materiales: | Materials:
- Usaremos cartón reciclado lo suficiente
- Silicon
- Tijera
- Borrador
- Lápiz
- Regla
- Trozo de cartulina metalizada (dorada o de el de tu preferencia)
- Papel transparente delgado o acetato
- We will use recycled cardboard as much as possible
- Silicon
- Scissors
- Eraser
- Pencil
- Ruler
- Piece of metallic cardstock (gold or your favorite)
- Thin transparent paper or acetate
Pasos a seguir: | Steps to follow:
Paso 01
Step 01
I started first by cutting a square piece of cardboard and then marking the box, I will start by marking the box 12 cm wide and 16 cm long, then we will mark the horizontal and vertical lines with the measurements obtained, the thickness of the frame is approximately 2.5 cm wide, then we will use our scissors to cut off the excess and simply leave the box without the inside and with the edges cut out, I then proceed to cut another piece of the frame from another thicker cardboard that I got to make the frame a little thicker, we cut out the pieces again.
Paso 02
Step 02
In the next step we already have the cut pieces ready to be glued to the first one that I made with the slightly thinner cardboard. I glued them with my silicone very well to prevent it from coming off. In this case, I did it with hot or melted silicone. Then I placed the metallic cardboard with the front on top and I cut out the excess pieces inside, leaving them visible so that we can carry the views inside and cover the frame enough without the cardboard being visible.
Paso 03
Step 03
I have turned it over on the back and started to fold the views that we have left of the cardboard since it tends to be a little thick and it must be folded so that it can stick well to the surface where we are going to stick it, once we have folded the cardboard we proceed to stick each view well stuck to the edge, then we will take our piece of transparent paper and we will be placing it on the back of the frame and we will stick it little by little along the edges without the excess silicone being seen on the outside and not damaging our paper, we do this calmly.
Paso 04
Step 04
We continue gluing the transparent paper to the bottom of the frame so that we reach all the way around the frame. Once finished, we can simply place the photo we want. Once we place it, we can stick a piece of cardboard on the back to protect the photograph and that's it, that's how we finish it.
Resultado: | Result:
Friends, this is how the final results of my frame look. I really loved how simple and pretty it turned out. Now your souvenir photos will have a place where they can't be forgotten with this beautiful frame. If you like it, let me know in the comments. I would also be happy to know that you will make one like these from now on since you have learned how to make them. 🥰
Gracias por leerme queridos y apreciados amigos ,esto ha sido todo por hoy y nos vemos en otro tutorial de ideas creativas conmigo, saludos!! 👋🏻
Thank you for reading, my dear and appreciated friends. That's all for today, and I'll see you in another creative ideas tutorial with me. Best regards! 👋🏻
¡Hola!...Soy Annie
Una chica que le apasiona el diseño,la costura las manualidades y crear cualquier cosa de mucho uso con mis manos,tengo como hobbie la música ,el maquillarme,la pintura y el dibujo,expresar mis ideas y sentimientos en un dibujo es algo que me gusta hacer,amo la naturaleza,un atardecer ,la playa y disfrutar con mis familiares de los buenos momentos de la vida.❤️
Creando las cosas con amor🌷♥️ | Creating things with love🌷♥️
Images:my own work | Edited by:Canva® and PicsArt © | Translator:Google Translate |Device:TecnoSpark 8C .
Quedó bien bonito, una idea genial para hacer un regalo especial a alguien. Saludos!
Hola amiga feliz noche 💫así es 🥰🙏🏻gracias por comentar
This is such a beautiful frame, it came out so lovely and sleek. We love it friend!!
Thanks for walking us through the creation process.
selected by @ibbtammy
@diyhub oh!! Thanks friend for suport
Congratulations @anne002! You have completed the following achievement on the Hive blockchain And have been rewarded with New badge(s)
Your next target is to reach 2000 comments.
You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word
STOPCheck out our last posts:
Es una forma maravillosa de dar nueva vida a materiales que ya no usamos y además es un detalle muy especial para nuestras fotos. ¡Gracias por compartir este tutorial tan claro y fácil de seguir!
It's a wonderful way to give new life to materials we no longer use, and it's also a very special touch for our photos. Thank you for sharing this clear and easy-to-follow tutorial!