Hermosa corona elaborada con foami escarchado. (ESP/ING)

[kathyroza]

♥.•:¨○¨:•.♥.•:♣:•.♥♥.•:¨◘¨:•.♥♥.•:♣:•.♥.•:¨○¨:•:¨¨:•.♥

Hola mis querid@s hivers de esta maravillosa colmena, un gustazo en saludarles. Enviándoles muy buenas vibras para este y todos sus días. En esta ocasión quiero compartir con ustedes el tutorial de una hermosa corona elaborada con foami escarchado muy fácil y practica de hacer. A la misma puedes darle el uso que quieras, quizá para una coronación, cumpleaños o cualquier evento que amerite de este lindo y llamativo accesorio.

Hello my dear hivers from this wonderful hive, a pleasure to greet you. Sending you very good vibes for this and every day. On this occasion I want to share with you the tutorial of a beautiful crown made with frosted foami, very easy and practical to make. You can give it the use you want, perhaps for a coronation, birthday or any event that deserves this cute and striking accessory.

Los materiales a utilizar son los siguientes:

Foami tamaño carta, color plateado y fucsia
Hoja blanca o de reciclaje para los moldes
Lápiz creyón
Barra de silicon con pistola
Borrador
Tijera

The materials to be used are the following:
Foami letter size, silver and fuchsia
White or recycling sheet for molds
crayon pencil
Silicon bar with gun
Eraser
Scissors

Ahora vamos manos a la obra, con el paso a paso:

Now let's get to work, with the step by step:

Lo primero que debemos hacer es dibujar nuestra corona para sacar el molde.

The first thing we must do is draw our crown to remove the mold.

Luego plasmaremos en nuestro foami color plateado nuestro molde y recortaremos por los bordes para dar forma a la corona.

Then we will shape our mold in our silver-colored foami and cut the edges to shape the crown.

Y nos quedara de esta manera.

And it will stay this way.

Ahora nos enfocaremos en sacar los moldes de los diseños dentro de la corona. Como pueden visualizar están unos mas remarcados que otros e identificados con números, eso lo realice para poder saber donde va cada uno al momento de pegarlos.

Now we will focus on making the molds of the designs inside the crown. As you can see, some are more highlighted than others and identified with numbers, I did this to be able to know where each one goes when pasting them.

Al sacar los moldes, recortamos. Solo saque los moldes del lado izquierdo debido a que son los mismos del lado derecho, solo que al contrario.

When removing the molds, we cut. I only took out the molds from the left side because they are the same as the right side, just the other way around.

En el foami fucsia sacamos todas esas formitas que ya recortamos anteriormente.

In the fuchsia foami we take out all those forms that we already cut out earlier.

Seguidamente, en guía de nuestra corona molde, vamos pegando poco a poco cada diseño.

Next, following our mold crown guide, we gradually stick each design.

Y así va tomando forma nuestra encantadora corona.

And so our charming crown is taking shape.

Luego damos vuelta a la corona y terminamos de recortar, como se muestra en la imagen.

Then we turn the crown and finish trimming, as shown in the image.

Con el foami plateado que nos sobro, vamos a marcar dos tiras, la guia sera las tiritas que ya tiene la corona, las mismas miden 2cm.

With the silver foami that we have left over, we are going to mark two strips, the guide will be the strips that the crown already has, they measure 2cm.

Ya cortadas las tiras, lo que haremos es unificarlas pegandolas.

Once the strips are cut, what we will do is unify them by gluing them.

Teniendo la tira, uniremos pegando junto a las tiritas que ya tiene la corona, a 2cm cada lado.

Having the strip, we will join by gluing next to the strips that the crown already has, 2cm on each side.

Pegando la tira, así queda la parte posterior de la corona.

Pasting the strip, this is how the back of the crown looks.

Y para finalizar nuestro trabajo, de esta manera luce la encantadora corona. Espero les haya agradado el paso a paso de este hermoso resultado y lo hayan disfrutado tanto como yo. Ahora cuéntenme si les gusto, sus comentarios son muy valioso para mi. Me despido con mucho cariño de ustedes, chau chau, sera hasta un próximo post.

And to finish our work, this is how the charming crown looks.
I hope you have liked the step by step of this beautiful result and have enjoyed it as much as I did. Your comments are very valuable to me. Now tell me if you like me, your comments are very valuable to me. I say goodbye with love to you, bye bye, it will be until a next post.

Todos los textos y fotos son de mi propiedad. Para el collage principal use Canva. Para la traducción utilicé Google traductor. Y las fotos fueron tomadas con mi equipo ALCATEL TETRA, donde tambien use Snapchat.

All texts and photos are my property.
For the main collage I used Canva.
For the translation I used Google translator.
And the photos were taken with my ALCATEL TETRA equipment, where I also use Snapchat .

♥.•:¨○¨:•.♥.•:♣:•.♥♥.•:¨◘¨:•.♥♥.•:♣:•.♥.•:¨○¨:•:¨¨:•.♥

Comments

[mirz]

Great, beautiful crown, you did well🤗

[kathyroza]

Hi, thank you for your comment, I'm glad you liked it.

[mirz]

Most welcome 🤗

[hivebuzz]

Congratulations @kathyroza! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s):

You received more than 50 upvotes. Your next target is to reach 100 upvotes.

_{You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP}

Check out the last post from @hivebuzz:

Hive Power Up Month - Feedback from February day 15

Support the HiveBuzz project. Vote for our proposal!

[alicargofer]

Que linda corona, además luce muy linda

[kathyroza]

Feliz día, gracias amiga, valoro tu comentario, me alegra haya sido de tu agrado.