You are viewing a single comment's thread from:

RE: Guns n Drones Video Shooting Steel

in Outdoors and more3 years ago (edited)

I've got the Mavic 2 Pro now, which is this one pictured, not the zoom. Always wanted the zoom capability but I wanted the better camera on the Pro more. Yes, now I'll have the best of both worlds. I did just get the Mavic3 delivered but haven't flown it yet. The new RC Pro "smart controller" is on back order because of course not compatible with the Mavic 2 smart controller (bad move DJI).

Here's the ballistic data on the .35 cal FX Impact, I've had it up to 900 fps, but it loses a little accuracy with pellets. Most of these seem to like around 860-880fps for accuracy, and as you can see here, able to tune it to within 1.88 Std deviation across 10 shots. Those shooting the newer slugs are usually up in the high 980 or even hotter.

FX-Impact-35cal-Labradar-2020-10-24.jpg

I did another post on more detailed testing with target, coke can, and board in this post here if you're interested:
https://peakd.com/hive-139358/@ksteem/50-yard-35cal-9mm-fx-impact-pcp-testing

Wow, can't believe it's over a year now.

Sort:  

Wow that is some incredible power being generated just with air.

Yep that's it I've got to get into this I was really looking into the Benjamin bulldog in 357 which is really cool.

I'm wondering if you can use modern day hollow point ammunition with them or if you would have to make some adjustments.

I have seen them and seems like the copper might be a little bit too hard.

Now I have many many questions. Thank you very much for your precharge pneumatic marksmanship!

Even though impressive, it's still less velocity than .357 powder ammo, most folks are shooting lead, the rifling designed more for lead projectiles, but hollow points and multiple offerings available. I had lost most interest in even the .22 pellet rifles, .30 cal is really the sweet spot for quiet and per fill shot counts, but the .35 and higher really pack a punch. There of course are even larger .45, .50 and now even .75 cal out there, but they get so loud you might as well shoot powder.

Here in the United States is actually legal for you to attach suppressors and you can actually buy them over the counter which is the same suppressor that you would use on a centerfire or a rimfire however with none of the useless regulation.

No paperwork at all needed.

Funny how laws are. Just by changing the label on the product all the sudden it's legal.

And you can have a BB gun that shoots 1,400 rounds a minute.

I really can't wait to see the future evolution of this shooting sport

There are some slight differences to the suppressors, they are threaded differently than those designed for firearms. And yes, while changing the threads is not that difficult for someone with a few skills and research, it does then turn it into a felony (in mosst states) if not licensed for it, just like screwing an oil filter onto your weapon or any other unlicensed homemade device.

Oh my God... Lololol.

Adapter.

Funny the 1/2-28 to the 3/4 coarse adapter is only 0.75$ and sold over the counter.

Funny thing is is that all the ones that I've seen are in common size and thread pitches.

Yes, it's not hard, just a ridiculous law to make the feds money while keeping honest folks from protecting their hearing and being kind to their neighbors.

It's time to abolish the national firearms act as well as the ATF.

The people deserve freedom.