[ENG-ESP] Beautiful Hot Air Balloon made with useful materials !!! // Hermoso Globo Aerostático hecho con materiales de provecho!!!

in GEMS3 years ago

@grimarygrimont


ZZZZZZZZZZZZZZZZZZZ (5).jpg

Hello, God bless this community greatly, today I want to share with you the elaboration of this beautiful hot air balloon made with useful materials, so let's start

Hola, Dios bendiga grandemente a esta comunidad, hoy quiero compartir con ustedes la elaboración de este hermoso globo aerostático hecho con materiales de provecho, así que empecemos


Materiales:

  • Retazos de cartulina roja o la de su preferencia
  • 1 Tubo de papel higiénico
  • 1 palo de altura
  • algodon
  • Pintura roja
  • hilo
  • un trozo de anime
    *pincel
  • tijera
  • lápiz
  • silicon

Materials:

  • Scraps of red card or your preference
  • 1 Toilet paper tube
  • 1 height stick
  • cotton
  • Red paint
  • thread
  • a piece of anime
    *Brush
  • scissor
  • pencil
  • silicon

IMG_5456.JPG


Paso 1
Vamos a cortar el tubo de papel higiénico por la mitad, y luego pintamos esa mitad tanto por dentro como por fuera


Step 1
We are going to cut the toilet paper tube in half, and then paint that half both inside and out.

IMG_5457.JPG

IMG_5458.JPG

IMG_5459.JPG

IMG_5460.JPG

IMG_5461.JPG

IMG_5462.JPG


IMG_5463.JPG


Paso 2
Vamos a buscar un molde de corazón, y vamos a marcar 7 corazones en la cartulina roja, el tamaño de los corazones tiene que ser el mismo así que usemos un molde, luego los cortamos y los pegamos con silicona como que se muestra en la imagen para formar la parte superior de nuestro globo aerostático


Step 2
We are going to look for a heart mold, and we are going to mark 7 hearts on the red cardboard, the size of the hearts has to be the same so let's use a mold, then we cut them and we glue them with silicone as shown in the image to form the top of our hot air balloon


IMG_5464.JPG

IMG_5467.JPG

IMG_5468.JPG

IMG_5466.JPG

IMG_5469.JPG


IMG_5470.JPG


IMG_5471.JPG


IMG_5473.JPG


IMG_5475.JPG


IMG_5476.JPG


IMG_5477.JPG


IMG_5478.JPG


IMG_5479.JPG


IMG_5480.JPG


IMG_5481.JPG


IMG_5482.JPG


IMG_5483.JPG


Paso 3
Luego a nuestra mitad de rollo ya pintado le haremos una tapa con la cartulina roja, luego de marcarla y pegarsela, pegamos adentro del tubo un pedazo de anime pequeño con silicón, este e nuestro canasto del globo aerostático


Step 3
Then to our half of the roll already painted we will make a cover with the red cardboard, after marking it and sticking it, we glue inside the tube a piece of small anime with silicone, this is our hot air balloon basket


IMG_5484.JPG

IMG_5485.JPG

IMG_5486.JPG


IMG_5487.JPG


IMG_5488.JPG


IMG_5489.JPG


IMG_5490.JPG


IMG_5491.JPG


IMG_5492.JPG


Paso 4
Del palo de altura solo cortaremos la mitad, lo cubrimos con silicon y lo pegamos por la parte de adentro del globo dejando un pedazo sobrante de palo de altura para posteriormente mas adelante incrustarlo en el anime que esta en la cesta del globo aerostático


Step 4
We will only cut half of the height stick, cover it with silicone and stick it on the inside of the balloon, leaving a shadowy piece of the height stick to later embed it in the anime that is in the basket of the hot air balloon.

IMG_5493.JPG

IMG_5494.JPG

IMG_5495.JPG


IMG_5496.JPG

IMG_5497.JPG


Paso 5
Del hilo cortaremos 12 tiras de aproximadamente 15 centímetros, y vamos a hacer 4 juegos de trenzas de 3 hilos cada una. estas serán las cuerdas de nuestro globo aerostático


Step 5
From the thread we will cut 12 strips of approximately 15 centimeters, and we are going to make 4 sets of braids of 3 threads each. these will be the strings of our hot air balloon

IMG_5498.JPG

IMG_5499.JPG

IMG_5500.JPG

IMG_5501.JPG

IMG_5502.JPG

IMG_5503.JPG


IMG_5504.JPG


Paso 6
Ahora encrustaremos la parte de arriba del globo a la canasta, después tomamos las cuerdas y amaramos la primera a la parte inferior del globo y pegamos su otro extremo a la parte de la canasta, después hacemos lo mismo con las otras cuerdas de manera que queden alrededor de globo para que de la impresión de estar sujetándolo, es importante quitar los sobrantes de las cuerdas para que quede mas limpio y ordenado nuestro globo, y para finalizar el globo aerostático le pegaremos en la parte inferior de la canasta unos algodones para que parezca que el globo esta sobre las nubes


Step 6
Now we will embed the top of the balloon to the basket, then we take the strings and we tie the first to the bottom of the balloon and glue its other end to the part of the basket, then we do the same with the other strings so that they remain around the balloon so that it gives the impression of being holding it, it is important to remove the leftover strings so that our balloon is more clean and tidy, and to finish the aerostatito balloon we will stick some cottons at the bottom of the basket to make it look like that the balloon is above the clouds

IMG_5505.JPG

IMG_5506.JPG


IMG_5507.JPG


IMG_5508.JPG

IMG_5509.JPG


IMG_5510.JPG


IMG_5511.JPG


IMG_5512.JPG


IMG_5513.JPG


IMG_5514.JPG


IMG_5515.JPG


IMG_5516.JPG


IMG_5517.JPG


IMG_5518.JPG


IMG_5519.JPG


IMG_5521.JPG


IMG_5525.JPG



Hemos terminado nuestro hermoso globo aerostático y con materiales que puedes tener en casa, espero les sea de provecho

We have finished our beautiful hot air balloon and with materials that you can have at home, I hope it will be of use to you


IMG_5522.JPG


Sin título (51).png


Bye Bye

Sort:  

Congratulations @grimarygrimont! You have completed the following achievement on the Hive blockchain and have been rewarded with new badge(s):

You received more than 2000 upvotes.
Your next target is to reach 2250 upvotes.

You can view your badges on your board and compare yourself to others in the Ranking
If you no longer want to receive notifications, reply to this comment with the word STOP

Check out the last post from @hivebuzz:

Hive Power Up Month - Feedback from Day 18