• print3dpro (62)in Liketu • 2 years ago

  3D Printed Isometric Cube Trellis

  3D Printed Trellis Covid The Kitty Hello Everyone, This is a minimal trellis I printed today for a small tomato plant. After all is said and done, the…

  $4.88

  • Past Payouts $4.88
  • - Author $2.44
  • - Curators & beneficiaries $2.43
  • > liketu: $0.02

   39 6
• print3dpro (62)in STEMGeeks • 2 years ago

  3D Printed Vase For Clones

  Hello Everyone, Yesterday I shared a vase I printed for the use of cloning cannabis. Although it works just fine I felt things could be improved slightly. It was a bit top…

  $21.69

  • Past Payouts $21.69
  • - Author $10.87
  • - Curators $10.82

   180 3
• print3dpro (62)in STEMGeeks • 2 years ago

  3D Printed Vase For A Specific Purpose

  Hello Everyone, For anyone seeing this account for the first time, this is @futuremind's 3D printing blog. I've been inactive for a while on this blog because of being busy with so many things in my life,

  $2.03

  • Past Payouts $2.03
  • - Author $1.03
  • - Curators $1.00

   120 3
• print3dpro (62)in 3D Printing • 2 years ago

  EDITED - PLEASE DO NOT VOTE

  EDITED PLEASE CONSIDER REMOVING VOTES CURRENTY IN PLACE ON THIS POST. THE CURATION TEAM HAS DEEMED MY CONTENT NOT WORTHY OF CURATION ON THE PREMISE OF LACK OF ENGAGEMENT AND…

  $0.00

  • Max accepted payout: $100,000.00

   60 11
• print3dpro (62)in 3D Printing • 2 years ago

  3D Printed Grow Tent Fan Bracket

  Hello Everyone, Lately I have had the printer pretty busy with printing gardening supplies, but much of it has been things I have already blogged about before and was doing…

  $30.62

  • Past Payouts $30.62
  • - Author $15.33
  • - Curators $15.28

   129 8
• print3dpro (62)in 3D Printing • 2 years ago

  3D Printed Drip System Parts

  Hello Everyone, I recently finished an indoor garden drip system project and published a post about it on my main blog yesterday. It turned out to be such a success that…

  $18.75

  • Past Payouts $18.75
  • - Author $9.39
  • - Curators $9.35

   65 7
• print3dpro (62)in 3D Printing • 2 years ago

  3D Printing - Calibration and Cannabis

  ▶️ Watch on 3Speak Hello Everyone, The 3D printer has been down for a while due to a broken parts cooling fan, but now we're back up and running again. Due to the…

  $23.70

  • Max accepted payout: $100,000.00
  • Past Payouts $23.70
  • - Author $11.90
  • - Curators & beneficiaries $11.80
  • > spk.beneficiary: $1.30

   131 7
• print3dpro (62)in 3D Printing • 2 years ago

  GLUE'S-CLUES

  In deep thought as I grip my glue gun for comfort. Why.... WHY did you have to break parts fan? Are you really broken? Perhaps you are just eluding my perceptual…

  $16.43

  • Past Payouts $16.43
  • - Author $8.23
  • - Curators $8.20

   43 5
• print3dpro (62)in 3D Printing • 2 years ago

  3D Printed Guitar Capo

  ▶️ Watch on 3Speak Hello Everyone, This morning I 3D printed a guitar capo, and not only did it print beautifully, it also works perfectly on my Jasmine guitar as…

  $39.89

  • Max accepted payout: $100,000.00
  • Past Payouts $39.89
  • - Author $19.99
  • - Curators & beneficiaries $19.90
  • > spk.beneficiary: $2.19

   86 9
• print3dpro (62)in 3D Printing • 2 years ago

  Microgreens Planter - Designed and 3D Printed

  Hello Everyone, Lately I haven't been highly active with the 3D printing and have been deeper into the gardening, which can be seen on my main blog @futuremind. I've been…

  $46.01

  • Past Payouts $46.01
  • - Author $23.05
  • - Curators $22.96

   88 12
• print3dpro (62)in 3D Printing • 2 years ago

  3D Printed Funnels

  Hello Everyone, Lately the 3D printer has been working overtime, and my main objective is to print things that are useful, or referred to in the 3D printing world as "practical…

  $18.79

  • Past Payouts $18.79
  • - Author $9.43
  • - Curators $9.36

   154 21
• print3dpro (62)in 3D Printing • 2 years ago

  3D Printed Dinner Plate

  Hello Everyone, The past few days I've been working on a few different prints, two of which are still a work in progress and one of them is 50% complete. It's exciting…

  $15.19

  • Past Payouts $15.19
  • - Author $7.61
  • - Curators $7.58

   89 11
• print3dpro (62)in 3D Printing • 2 years ago

  3D Printed LST - (Low Stress Training Clips)

  Hello Everyone, Lately I've had all kinds of projects going on, and this is one that I've been pretty excited about. It's relatively simple for a 3D printing project, and my…

  $53.58

  • Past Payouts $53.58
  • - Author $26.92
  • - Curators $26.66

   619 14
• print3dpro (62)in 3D Printing • 2 years ago

  3D Printed Salt And Pepper Shakers - And More!

  Hello Everyone, Lately I've been working on some small prints, nothing major at the moment. I have some plans for upcoming designs, one of which is a special kind of planter…

  $49.88

  • Past Payouts $49.88
  • - Author $24.98
  • - Curators $24.91

   168 13
• print3dpro (62)in 3D Printing • 2 years ago

  The First 3D Printing Project I Was Paid For!

  Hello Everyone, Today I'm super excited to share this project that I've been working tirelessly on for the past nine days. The project was proposed to me by @davidke20, who…

  $30.79

  • Past Payouts $30.79
  • - Author $15.50
  • - Curators $15.29

   546 27
• print3dpro (62)in 3D Printing • 3 years ago

  Cleaning The Ender 3 V2

  ▶️ Watch on 3Speak Hello Everyone, Today I was chatting with a new Hive friend of mine @l337m45732 about getting our printers working nice, and cleaning was brought…

  $19.11

  • Max accepted payout: $100,000.00
  • Past Payouts $19.11
  • - Author $9.57
  • - Curators & beneficiaries $9.54
  • > spk.beneficiary: $1.05

   71 11
• print3dpro (62)in 3D Printing • 3 years ago

  3D Printed 3Speak Verification!

  ▶️ Watch on 3Speak Hello Everyone, This is my first 3Speak video 3D printing! Some of you might know me as @futuremind, my main account on Hive. I was away for a…

  $15.56

  • Max accepted payout: $100,000.00
  • Past Payouts $15.56
  • - Author $7.79
  • - Curators & beneficiaries $7.77
  • > spk.beneficiary: $0.86

   75 13
• print3dpro (62)in 3D Printing • 3 years ago

  Ender 3 V2 3D Printer Hot End Upgrade - And More!

  Hello Everyone, I've been on a mission to get this Ender 3 V2 3D printer working optimally. I've replaced so many stock components since getting this printer, that I would…

  $13.57

  • Past Payouts $13.57
  • - Author $6.80
  • - Curators $6.77

   91 4
• print3dpro (62)in 3D Printing • 3 years ago

  The 3D Slicer WILL Humble You

  Hello Everyone, Today things couldn't have gone any worse on the Creality Ender 3 V2 3D printer, but in the end I was able to solve a catastrophic printing failure with…

  $14.31

  • Past Payouts $14.31
  • - Author $7.17
  • - Curators $7.14

   86 3
• print3dpro (62)in 3D Printing • 3 years ago

  Tweaking The Printer - With A Fidget Cat

  Hello Everyone, I've been tweaking some technical inputs with the Creality Ender 3 V2 in the slicer settings. This first half of this post will contain information that is…

  $18.29

  • Past Payouts $18.29
  • - Author $9.16
  • - Curators $9.13

   83 8